Greg Erskine wrote: > Just type official" 7" display into your search engine of choice. You > should get hundreds of hits. > > Pick the one relevant to your location. > > more info: https://www.raspberrypi.org/products/
ok, will do. read the lengthy instructions on PUGHx2, but have couple of questions regarding calibration: 1) on the Tweaks tab, jivelite autostart seems to be stuck on Yes. it will not stay set to No. apparently, the calibration only works without jivelite running. 2) how do i identify the touchscreen in /proc/bus/input/devices? here's what i see: I: Bus=0003 Vendor=222a Product=0001 Version=0110 N: Name="ILITEK ILITEK-TP" P: Phys=usb-3f980000.usb-1.1.2/input1 S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:222A:0001.0002/input/input0 U: Uniq=V06.00.00.00 H: Handlers=mouse0 event0 js0 B: PROP=0 B: EV=1b B: KEY=1f0000 0 0 0 0 0 0 0 0 B: ABS=3 B: MSC=10 I: Bus=0003 Vendor=222a Product=0001 Version=0110 N: Name="ILITEK ILITEK-TP" P: Phys=usb-3f980000.usb-1.1.2/input0 S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:222A:0001.0001/input/input1 U: Uniq=V06.00.00.00 H: Handlers=mouse1 event1 B: PROP=2 B: EV=b B: KEY=400 0 0 0 0 0 0 0 0 0 0 B: ABS=2608000 3 3) finally, for the calibration command itself, sudo TSLIB_FBDEVICE=/dev/fb1 TSLIB_TSDEVICE=/dev/input/event0 /usr/local/bin/ts_calibrate in my system, i only see /dev/fb0... still trying to make my 5" touchscreen to work correctly touch-wise before resorting to buying the 7" display. since jivelite looks just fine visually but the touch positioning is off, i'm hoping the calibration will fix the issue... ------------------------------------------------------------------------ pavowren's Profile: http://forums.slimdevices.com/member.php?userid=51958 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
