Linvincible wrote:
> Hello, just updated to pcp4
>
> squeezelite will not start if I use the driver hifiberry digi+ pro, doe
> sonly when I use the driver hifiberry DAC+ Light (this is a straight
> bypass of I2S signal, card does nothing)
>
> Hifiberry support said:
>
> -as we're not the developers of PiCorePlayer, we can't really debug
> this. It looks like the Digi+ Pro isn't configured at all. Usually that
> can be done by adding the correct overlay to /boot/config.txt. However,
> I don't know if this will also work with PiCorePlayer. I recommend to
> directly contact the developers.
> -
>
> I don't know what they're talking about... is there a guide about this?
Hi Linvincible,
It should be a matter of selecting "HiFiBerry Digi and Digi+" or
"HiFiBerry Digi+ Pro".
There is a confusion (to me anyway), mine says it a:
Code:
--------------------
HiFiBerry Digi-Pro HW 1.1
config.txt dtoverlay=hifiberry-digi
--------------------
HiFiBerry Digi and Digi+ uses dtoverlay=hifiberry-digi
HiFiBerry Digi+ Pro uses dtoverlay=hifiberry-digi-pro
What does it exactly say on your HiFiBerry Digi PCB?
BTW:
1. What is your Command #1 for? /usr/local/bin/sds.sh
2. Also there seems to be a GPIO conflict with your IR remote.
regards
Greg
------------------------------------------------------------------------
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=109404
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
