So I performed the USB stick repair on a desktop linux, with fsdsk,
which found some errors. But it is still not working.
After boot, dmesg states
Code:
--------------------
...
[ 0.872661] mmc1: new high speed SDIO card at address 0001
[ 0.900818] Indeed it is in host mode hprt0 = 00021501
[ 0.969065] mmc0: host does not support reading read-only switch, assuming
write-enable
[ 0.971945] mmc0: new high speed SD card at address abe4
[ 0.972218] mmcblk0: mmc0:abe4 SD02G 1.83 GiB
[ 0.973096] mmcblk0: p1 p2
[ 1.110765] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.110884] Indeed it is in host mode hprt0 = 00001101
[ 1.351089] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 1.351098] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.351652] hub 1-1:1.0: USB hub found
[ 1.351737] hub 1-1:1.0: 4 ports detected
[ 1.670728] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.800842] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 1.800847] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.801191] hub 1-1.1:1.0: USB hub found
[ 1.801247] hub 1-1.1:1.0: 3 ports detected
[ 3.060725] usb 1-1.1.2: new high-speed USB device number 4 using dwc_otg
[ 3.412626] zram: Added device: zram0
[ 3.425175] zram0: detected capacity change from 0 to 246484992
[ 3.427958] random: mkswap: uninitialized urandom read (16 bytes read)
[ 3.430629] Adding 240704k swap on /dev/zram0. Priority:-2 extents:1
across:240704k SSFS
[ 3.503067] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.561330] usb 1-1.1.2: New USB device found, idVendor=1f75,
idProduct=0917
[ 3.561338] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.561341] usb 1-1.1.2: Product: PenDrive
[ 3.561344] usb 1-1.1.2: Manufacturer: Innostor
[ 3.561348] usb 1-1.1.2: SerialNumber: 265254437914238
[ 3.561763] usb-storage 1-1.1.2:1.0: USB Mass Storage device detected
[ 3.562212] scsi host0: usb-storage 1-1.1.2:1.0
[ 3.660764] usb 1-1.1.3: new full-speed USB device number 5 using dwc_otg
[ 3.806938] usb 1-1.1.3: New USB device found, idVendor=0483,
idProduct=5740
[ 3.806945] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.806949] usb 1-1.1.3: Product: STM32 Audio Class
[ 3.806952] usb 1-1.1.3: Manufacturer: STMicroelectronics
[ 3.806956] usb 1-1.1.3: SerialNumber: 00000000001A
[ 4.073655] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.110734] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg
[ 4.240936] usb 1-1.1.1: New USB device found, idVendor=0424,
idProduct=7800
[ 4.240941] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.376488] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.507582] libphy: lan78xx-mdiobus: probed
[ 4.631139] scsi 0:0:0:0: Direct-Access Innostor Innostor 1.00
PQ: 0 ANSI: 6
[ 4.631757] sd 0:0:0:0: [sda] 61440000 512-byte logical blocks: (31.5
GB/29.3 GiB)
[ 4.631972] sd 0:0:0:0: [sda] Write Protect is off
[ 4.631994] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 4.632236] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled,
doesn't support DPO or FUA
[ 4.634489] sda: sda1
[ 4.636085] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 10.784874] snd_bcm2835: module is from the staging directory, the quality
is unknown, you have been warned.
[ 10.798572] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 10.839049] usbcore: registered new interface driver snd-usb-audio
[ 12.153284] random: crng init done
--------------------
------------------------------------------------------------------------
JMF11's Profile: http://forums.slimdevices.com/member.php?userid=68399
View this thread: http://forums.slimdevices.com/showthread.php?t=110550
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
