paul- wrote:
> Not sure how this happens, as the extension that contains the boot
> script, also contains the default configuration. So getting a file not
> found error seems a bit impossible.
>
> Have you done anything else to this installation? Do you have a fresh SD
> card that you can just burn, and then setup the card?
No, just a plain set up using Ethcher to write image to a 128MB (MB not
GB) SDCard. Done nothing else to SDCard.
Code:
--------------------
Generated by xtras_resize.cgi on Mon Jan 27 19:22:20 UTC 2020
_ _____ ___ __
___ (_) ___/__ _______ / _ \/ /__ ___ _____ ____
/ _ \/ / /__/ _ \/ __/ -_) ___/ / _ `/ // / -_) __/
/ .__/_/\___/\___/_/ \__/_/ /_/\_,_/\_, /\__/_/
/_/ /___/
piCorePlayer = piCore + Squeezelite + Raspberry Pi
The software is provided "as is" without warranty of any kind,
either express or implied, including without limitation any implied
warranties of condition, uninterrupted use, merchantability,
fitness for a particular purpose, or non-infringement.
Filesystem Size Used Available Use% Mounted on
/dev/mmcblk0p2 42.5M 32.8M 6.3M 84% /mnt/mmcblk0p2
Disk /dev/mmcblk0: 121 MB, 127139840 bytes, 248320 sectors
3880 cylinders, 4 heads, 16 sectors/track
Units: sectors of 1 * 512 = 512 bytes
Device Boot StartCHS EndCHS StartLBA EndLBA Sectors
Size Id Type
/dev/mmcblk0p1 128,0,1 127,3,16 8192 73727 65536
32.0M c Win95 FAT32 (LBA)
/dev/mmcblk0p2 128,0,1 639,3,16 73728 172031 98304
48.0M 83 Linux
--------------------
------------------------------------------------------------------------
rincage's Profile: http://forums.slimdevices.com/member.php?userid=69770
View this thread: http://forums.slimdevices.com/showthread.php?t=110642
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
