Are the register settings permanently written to the device, and are the tools provided pre-built for a different OS? If so, could you use that OS to disable the boot timeout?
>From the product brief: > PI_BOOT_TO > 1 byte, register address 0x21, read/write, saved to flash > Default value: 30 (corresponding to 300 seconds or 5 minutes, resolution > of 10 seconds per LSB) > The LiFePO4wered/Pi+ will not indefinitely stay in the boot state if > there is no response from the > Raspberry Pi. Instead, power will be turned back off after the boot > timeout expires. The boot timeout > can be set in 10 second increments up to 2550 seconds or 42.5 minutes. > *Setting this register to 0 turns > the boot timeout off.* > The Raspberry Pi host software package contains scaling code so the > value can be read and set in > seconds for convenience ------------------------------------------------------------------------ chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=112134
_______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
