Hi, I just had another look at the documentation plink provided by Paul. https://github.com/raspberrypi/linux/blob/9da67d7329873623bd5c13fae5835d76d5be8806/arch/arm/boot/dts/overlays/README#L877 >From what I understand (I might be wrong...): - if you use GPIO 17 then it should work fine for a shutdown but then I suspect it won't work to power up. - The Pi can be powered up using a button on GPIO 3 (pin 5), hence the choice made in the tutorial you referred to. BUT, from the other forum thread, I understand that you need to disable I2C in PcP to allow for the button to be listened to on that pin... see link below to the post. You need to make the choice...
https://forums.slimdevices.com/showthread.php?109270-PiCore-Player-and-gpio-poweroff-gpio-shutdown-overlays&p=940096&viewfull=1#post940096 ------------------------------------------------------------------------ truscellino's Profile: http://forums.slimdevices.com/member.php?userid=69928 View this thread: http://forums.slimdevices.com/showthread.php?t=112136 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
