New binary has been uploaded to git that exposes all of the arguments
required for SPI support, additional parameters for I2C also exposed to
round out the featureset.
Defaults should be all that is necessary
Code:
--------------------
-x specifies OLED address if default does not work - use i2cdetect to find
address (Pi only)
-B I2C bus number (defaults 1, giving device /dev/i2c-1)
-R I2C/SPI reset GPIO number, if needed (defaults 25)
-D SPI DC GPIO number (defaults 24)
-C SPI CS number (defaults 0)
-z no splash screen
Supported OLED types:
1 ...: Adafruit SPI 128x64
3 ...: Adafruit I2C 128x64
4 ...: Seeed I2C 128x64
6* ..: SH1106 I2C 128x64
*7 ...: SH1106 SPI 128x64*
* is default
--------------------
For SPI simply specify *-o 7* and any additional parameters to match
your configuration
I'm in the process of adding one additional configuration to cover the
SSD1306 chipset, that should cover pretty much all of the popular OLED
setups.
If you see instability, intermittent garbage on the SPI device, this is
likely down to the device being SSD1306 based
Hold tight for the next update.
As of 2020/05/28
*Total Tracks: 149,488
Total Albums: 13,686
Total Artists: 19,378
Total Genres: 686
Total Playing Time: 24152:01:52*
------------------------------------------------------------------------
shunte88's Profile: http://forums.slimdevices.com/member.php?userid=40185
View this thread: http://forums.slimdevices.com/showthread.php?t=111790
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
