Hello!
I have a piCorePlayer 6 installation with LMS and to use it also as a headless player I attached USB Harmon Kardon Soundsticks to it. To get good results for volume I had to use alsamixer: 30579 I saved it using the website: 30580 If I am not using alsamixer the music is nearly off at 50% volume setting, it is at normal hearing volume when I use 85% volume setting. At 100% is is a little bit louder. This is a very strange setting, so I used alsamixer to use the whole volume control and not only a part of it. Because I not always use the Soundsticks, I am switching them off. But after switching them back on the values for alsamixer are switched to this: 30581 If I am doing a restart of squeezelite then, nothing changes. The value for alsamixer is not restored. Also if I am doing a reboot of the whole Pi nothing is restored. What do I have to do to get the alsamixer value back after switching on the speakers and after a reboot? This are the values I used on the squeezelite page: Audio output device settings: USB audio Output settings: hw:CARD=SoundSticks,DEV=0 These are the possible values there: 30582 ALSA setting: 80-4--1- What do I have to do to handle this correctly? What I am doing wrong? +-------------------------------------------------------------------+ |Filename: Bildschirmfoto 2020-06-04 um 17.21.02.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=30582| +-------------------------------------------------------------------+ Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7" Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for Hifiberry and Bluetooth headphone; two Airport Express ------------------------------------------------------------------------ carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=112344 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
