Man in a van wrote:
> @SCIURIUS
>
> I have just tried the image I used previously, with the pi on an
> Ethernet connection.
>
> Same result, or rather lack of result, one green flash and nothing.
>
> I download a fresh image and that also failed on Ethernet.
>
> I took the sd card and put it ino a rpi 4b and it loads OK
>
> Returned to the rpi 3b with the piCorePlayer 6.0.0.zip and it works
> okay. So there must be something with the 6.1.0 image.
>
> This my rpi3b hardware
Hi guys,
Here's my tests of pCP 6.1.0 on RPi3. Image downloaded from pCP download
site.
Code:
--------------------
Testing install of pCP 6.1.0 on a RPi3 using wired ethernet
1. Create fresh SD card with pCP 6.1.0 using USBImager 1.0.3 - OK
2. Install SD card and boot - OK
Model: 3B
Revision: a22082
PCB Revision: 1.2
Memory: 1024
Shortname: pCP-3B-2c4729
CPU Temperature: 34
eth0 IP: 192.168.1.108
wlan0 IP: None
LMS IP: 192.168.1.51
Uptime: 0 days 0 hours 1 minute 8 seconds
Physical MAC: b8:27:eb:2c:47:29
Wireless MAC: None
Configuration MAC: Not set
Controls MAC: b8:27:eb:2c:47:29
3. Setup wifi via web GUI - OK
4. Use Wifi IP 192.168.1.112 to access web GUI - OK
Model: 3B
Revision: a22082
PCB Revision: 1.2
Memory: 1024
Shortname: pCP-3B-2c4729
CPU Temperature: 37
eth0 IP: 192.168.1.108
wlan0 IP: 192.168.1.112
LMS IP: 192.168.1.51
Uptime: 0 days 0 hours 5 minutes 23 seconds
Physical MAC: b8:27:eb:2c:47:29
Wireless MAC: b8:27:eb:79:12:7c
Configuration MAC: Not set
Controls MAC: b8:27:eb:2c:47:29
4. Reboot - OK
5. Test web GUI using wifi 192.168.1.112 - OK
6. Test web GUI using ethernet 192.168.1.108 - OK
--------------------
Code:
--------------------
Testing install of pCP 6.1.0 on a RPi3 using wifi
1. Create fresh SD card with pCP 6.1.0 using USBImager 1.0.3 - OK
2. Add wpa_supplicant.conf to SD card - OK
3. Install SD card and boot - OK
Model: 3B
Revision: a22082
PCB Revision: 1.2
Memory: 1024
Shortname: pCP-3B-2c4729
CPU Temperature: 35
eth0 IP: None
wlan0 IP: 192.168.1.112
LMS IP: 192.168.1.51
Uptime: 0 days 0 hours 3 minutes 28 seconds
Physical MAC: b8:27:eb:2c:47:29
Wireless MAC: b8:27:eb:79:12:7c
Configuration MAC: Not set
Controls MAC: b8:27:eb:79:12:7c
4. Reboot - OK
--------------------
So I am not sure pCP 6.1.0 works on my RPi3. There must be another
factor?
regards
Greg
------------------------------------------------------------------------
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=111787
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
