Hi,
I'm a new piCorePlayer user, and am astounded by the software. It is great! Thanks to all the contributors! I am running piCorePlayer 6.0.0 on a Raspberry Pi with LMS installed on the Pi. I'm also using the 7" LCD and HiFiBerry DAC+. LMS is configured to mount my music from the NAS drive to /mnt/nas. I'm using WiFi, rather than a wired connection. I built the power switch described here: othermod.com/raspberry-pi-soft-onoff-circuit/ (I had to remove the http part since this is my first post) Everything works great, except that the shutdown would hang after displaying "Unmounting all filesystems". Since the shutdown didn't complete, the TXD pin (GPIO14 / pin 8) would never go low, so power to the Pi would not cut off. After some troubleshooting, I found that the "Terminating all processes" step would kill the wpa_supplicant process, causing the later NFS unmount of /mnt/nas to hang. I added pgrep wpa_supplicant >> /var/tmp/k5_skip to the "User commands" section of the Tweaks page so that process would be excluded from the killall5. Shutdown now completes successfully and power is cut to the Raspberry Pi at the end of the shutdown. So this works, but I think I'm missing a better/easier way to handle this. Googling around, I didn't find a mention of this kind of problem, but I may have just used the wrong magic words. Any suggestions? Thanks, Mike ------------------------------------------------------------------------ mike_b's Profile: http://forums.slimdevices.com/member.php?userid=70480 View this thread: http://forums.slimdevices.com/showthread.php?t=112679 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
