Hi there
I have a setup with Raspberry Pi3+, mounted with the ApplePi DAC (no longer available). My problem is that I have a yellow lightning-bolt, and during boot process I get a 'under-voltage' error. Wifi and Bluetooth + HDMI is disabled to reduce the power requirement, and I'm using standard settings (not overclocking, almost rather the opposite). I know the ApplePi requires quite some juice. Therefore it is default delivered with a powerful 5.25 Volt and 3 Ampere PSU. Like this one: https://www.amazon.com/gp/product/B01HB44IE6/ I think my problem is the cable. It cannot be replaced on this particular PSU. Does anyone know of another one which can deliver about 16 Watt? Ideally one where I can decide what USB cable I use (replaceable), and I'd like one with 20 AWG wire inside for the power-line. Like this one: https://www.amazon.de/-/en/Original-G4-G3-G2-High-20-AWG-Charger-Retail/dp/B01KI4LYFM/ ... Unfortunately this reseller doesn't ship to Norway or Denmark. P.S. I did a thermal image on the DAC-board and the temperature is 43 deg Celsius ... the developer and I agree, that's low, and there's nothing on the board that is near dead and causing unusual power draw. I really think it's that darn cable, or maybe just the connector - maybe some contact cleaner could solve the problem. Anyone else have such problems, and how did you solve it? Any comment is highly appreciated. Thanks. Best regards, Claus ------------------------------------------------------------------------ cfuttrup's Profile: http://forums.slimdevices.com/member.php?userid=32784 View this thread: http://forums.slimdevices.com/showthread.php?t=113258 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
