TimG wrote: > Hi psketch, > > I'm not surprised I'm doing it wrong...! > > Normally (ie by default, before I started doing anything to mess things > up) the output device was specified as hw:CARD=sndrpihifiberry. The > default setting plays stereo, but I only have one speaker connected to > the right channel. All I want to do is down mix both channels into a > single mono output on the right channel. I don't need anything on the > left channel - nothing is connected to it. > > I thought I needed to use asound.conf to effect the down-mix, but it > turns out I've no idea how. I've tried using the asound tab in pcp, and > I've tried manually editing asound.conf via putty. There is a suggestion > (in another thread) based on a post on the hifiberry website. I've tried > that too, but couldn't do that right either... > > I've looked at the documentation for asound but it is much too complex > for me to understand, I'm afraid. > > Thanks, > > Tim
I have a similar use case for a piCorePlayer built into an old transistor radio, and I have found the asound mono settings to work reliably. I usually start with Squeezelite Settings > Card Control and uncheck Enable/disable built-in audio (so that built in audio is disabled), and hit save. Then in Squeezelit Settings, clear the Output settings box, and hit save. In the asound settings select: Mono Any volume adjustment you want to make Either hw or plughw (I use plughw) Card: 0 And hit write. Squeezelite should restart, and hopefully you will be in business. ------------------------------------------------------------------------ AngloCuencano's Profile: http://forums.slimdevices.com/member.php?userid=64040 View this thread: http://forums.slimdevices.com/showthread.php?t=113162 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
