vco1 wrote: > I just bought a new Topping D50s (replacing a Cambridge Audio DacMagic) > and connected this to an RPi 4 running piCorePlayer via USB. One of the > reasons to get the D50s was to get higher sample rates. The DM was only > able to get to 44.1KHz on USB. > > However, so far I've been able to "only" get 48KHz on the D50s using the > "sysdefault:CARD=D50s" Output Setting in pCP. Most other settings result > in 44.1KHz b.t.w. That 48KHz sample rate may be the maximum possible, > but it's a tad disappointing to say the least. Especially since I read > values of 192KHz and above in the USB DAC Google Sheet for DAC's that > seem less capable than the D50s. > > So, the question is, am I missing something? Do I need to change other > settings? Is someone having experience with the D50s (or D50) and > willing to share their settings? > > I'm not an expert on this, so some pointers to get me in the right > direction or confirm that 48KHz is really the maximum that can be > achieved with this setup would be much appreciated.
It should be capable of 192kHz so it is the setup of your card settings in piCorePlayer - what do you have as maximum rate? VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS ------------------------------------------------------------------------ d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=113628
_______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
