Hello all!
I use with success pcp for my audio multiroom since 4 years now. All
works fine.
One of my player is hoste on a Rpi3 (with embedded wifi chip), so I want
this player do more things like sharing LAN access.
I activate WAP mode, go to wap mode page and fill in fields. After
reboot access point is OK; I can connect to it with all my devices. But
in this mode, there is another dhcp server on the Rpi giving devices
connected an IP adress. I want use the bridge mode as connected devices
will have IP from my primary DHCP server.
This mode doesn't work because of brctl command can't operate the
bridgingbetween eth0 and wlan0:
Code:
--------------------
tc@pCP:~$ brctl
Usage: brctl [commands]
commands:
addbr <bridge> add bridge
delbr <bridge> delete bridge
addif <bridge> <device> add interface to bridge
delif <bridge> <device> delete interface from bridge
hairpin <bridge> <port> {on|off} turn hairpin on/off
setageing <bridge> <time> set ageing time
setbridgeprio <bridge> <prio> set bridge priority
setfd <bridge> <time> set bridge forward delay
sethello <bridge> <time> set hello time
setmaxage <bridge> <time> set max message age
setpathcost <bridge> <port> <cost> set path cost
setportprio <bridge> <port> <prio> set port priority
show [ <bridge> ] show a list of bridges
showmacs <bridge> show a list of mac addrs
showstp <bridge> show bridge stp info
stp <bridge> {on|off} turn stp on/off
tc@pCP:~$ brctl addbr br0
add bridge failed: Package not installed
--------------------
After many web search, it appears that the kernel of piCorePlayer is
compiled with the option "CONFIG_BRIDGE=m" ...
There is a way to make brctl command working without compiling a new
kernel ?
Thanks
Olivier
------------------------------------------------------------------------
oliverbg1's Profile: http://forums.slimdevices.com/member.php?userid=71652
View this thread: http://forums.slimdevices.com/showthread.php?t=114369
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
