paul- wrote: > The scripts are for RPiOS and also for X. pCP/jivelite only works with > framebuffers. Not an automatic install. It will take some messing > around. > > > However if you read the script > https://github.com/goodtft/LCD-show/blob/master/MHS35-show > > if you copy the overlay (line 12 of the script) except the location > is /mnt/mmcblkop1/overlays. (You will need to mount the boot > partition first) > > Then make the config edits. Line 21-29 > > > All of the drivers appear to be standard (Make sure you have installed > jivelite on pCP) > > > Then you should be able to configure jivelite like all of the waveshare > screens. Would following these instructions work?: https://docs.picoreplayer.org/projects/add-a-display/
- Synology D218+ running LMS 8.1.1 in Docker container - 1 x Squeezebox Touch, 2 x Squeezebox Radios, 1 x Squeezebox Receiver, Squeeze Player & Squeeze Ctrl apps on Galaxy Tab S5e & Galaxy A40 - Raspberry Pi 4B 8GB (with 7" Touchscreen in case & Flirc USB IR dongle) & Pi 4B 8GB in Flirc case, both running piCorePlayer 8.0.0 & LMS 8.1.1, connecting over Wi-fi to DS218+, or LMS library copy on 2TB USB hard drive plugged into Pi when no Wi-fi available - LMS library of ALAC, ACC/M4A and MP3 files ------------------------------------------------------------------------ AndyTwizzle's Profile: http://forums.slimdevices.com/member.php?userid=53445 View this thread: http://forums.slimdevices.com/showthread.php?t=114938 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
