Solved ! i looked at differences between HDMI and D10 configuration in pcp.cfg and i discorvered that also if D10 was working the output was not set in good wat. I forced a differente option and now also bluetooth is working good ! I changed output to sysdefault:CARD=D10, saved and now pcp.cfg is ok.
03-06 10:40 CET INFO ---- Caught Connect signal ---- 03-06 10:40 CET DEBUG /org/bluealsa/hci0/dev_20_F4_78_D2_54_EB/a2dpsnk/source 03-06 10:40 CET DEBUG HCI:hci0 03-06 10:40 CET INFO MAC:20:F4:78:D2:54:EB 03-06 10:40 CET INFO TRANSPORT:a2dpsnk 03-06 10:40 CET INFO Using bluealsa-aplay for device: 20:F4:78:D2:54:EB 03-06 10:40 CET DEBUG pCP OUTPUT="sysdefault:CARD=D10" 03-06 10:40 CET DEBUG LMS server IP:"" 03-06 10:40 CET DEBUG pCP ALSAVOLUME="" 03-06 10:40 CET DEBUG pCP Card Conf:"USB.conf" 03-06 10:40 CET INFO Starting player:"NewDevice" bluetooth, alsa device:"sysdefault:CARD=D10", volume:"". About bluetooth pairing problmes of pin request i discovered that if i DISABLE "always discoverable" and i manually connect from phone the already discovered pcp all is working good, without pin request. Maybe this is a small bug ? Thanks for suggestion to look at pcp.cfg file, in that way i disocevered the problem ! :D ------------------------------------------------------------------------ febomax's Profile: http://forums.slimdevices.com/member.php?userid=72641 View this thread: http://forums.slimdevices.com/showthread.php?t=114834 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
