johnny_jo wrote: > Hi there, > > I am currently trying to shift from volumio to piCorePlayer, as I > appreciate some capabilities which are not freely available in volumio > (e.g., analogue input, bluetooth) . > > I tested piCoreplayer and almost everything works fine on my RPI 4, > using HifiBerry DAC+ as HAT. So far so good. > > The only issue is that I can't make my touchscreen (Waveshare 7inch HDMI > LCD (C)) run properly. While the console looks fine during the boot > process, the actual presentation of piCoreplayer (i.e., jivelite) on the > screen is shifted/wrong. > > I have already played around with config.txt and tried the different > options. I also added the Waveshare settings: > > > I also successfully managed to calibrate the touch screen, following > some forum instructions. > > Since the screen is working properly during the boot process but only > behaves weird when jivelite starts, I suppose this has something to do > with some jivelite settings. Also, the touch seems to work correctly, as > I can use it. It is just not aligned with the jivelite screen. > > If there is anyone who can give me some advise, I would be very > thankful. I already did some extensive google research, including this > forum, yet without success. Since this is a very famous screen I > believe, others could be interested in solving this issue as well. Thank > you. > > Cheers, > Jo
I probably have the same Waveshare display (https://www.waveshare.com/wiki/7inch_HDMI_LCD_(H)_(with_case)), and it works fine with the Max2Play software which is another audio player system for the Raspberry Pi. My hardware consists of 2 x Raspberry Pi (2B and 3B+) each with a HifiBerry DAC+ and the Waveshare 7 inch displays (players), and a separate Max2play server (Raspberry 3B+). The added lines in the config.txt file that you had to make are also required, as well as some changes in the Jivelite configuration. I am not sure if you can change that settings in Jivelite with piCoreplayer to match the screen layout. It should be possible, to my opinion: all hardware is the same as yours, and it is only dependent of the availability of a configuration option for Jivelite (which is present in Max2play) to match the Waveshare display. Max2Play server and 2 x Max2play clients (Raspberry Pi), 2 x Squeezebox Radio ------------------------------------------------------------------------ tomsat50's Profile: http://forums.slimdevices.com/member.php?userid=56916 View this thread: http://forums.slimdevices.com/showthread.php?t=115700 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
