Thanks for the suggestions Will! What comes to mind right away is. Both the Radeon 7000 and Firewire/USB combo cards need to be in either PCI slot 1 or 2. Did that. Radeon 7000 will likely work best if you do a couple of settings in XPFacto. Set input to: keyboard and output to your video card. These are at the top with XPFacto opened. I think they are under advanced settings you will find them at the top. Also some people find setting booting to verbose mode (which is also located at the top) works better with the Radeon Card. You can also use this mode by holding down the apple and v keys when booting. best of luck, Will S Did this as well. When I boot into OSX I get the following message after typing in, BOOT, in verbose mode.
0) boot can�t OPEN: pci1/pci-bridge/ACARD6860M/@0:3 I believe the ACARD RAID card being in slot #3 is not being enabled with the Radeon and fw/usb cards taking up the first 2 slots. What I find interesting, is this all worked well with the IXMicro card installed, but OSX was way slow operating. The other thing is that this all works just fine booting into OS9.2.1. Lyle -- Unsupported OS X is sponsored by <http://lowendmac.com/> Support Low End Mac <http://lowendmac.com/lists/support.html> Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:UnsupportedOSX@;mail.maclaunch.com> To unsubscribe, email: <mailto:UnsupportedOSX-off@;mail.maclaunch.com> For digest mode, email: <mailto:UnsupportedOSX-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lemlists.com> Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
