The FT232R is abundantly available in all kinds of dongles and boards. There's also numerous cables available from FTDI with the FT232R chip.
http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm /Ake -----Original Message----- From: zoo...@gmail.com [mailto:zoo...@gmail.com] On Behalf Of Benjamin Henrion Sent: den 22 oktober 2012 00:54 To: Åke Rehnman Cc: urjtag-development@lists.sourceforge.net Subject: Re: [UrJTAG-dev] FT232R driver On Mon, Oct 22, 2012 at 12:42 AM, Åke Rehnman <ake.rehn...@gmail.com> wrote: > So, here's the final FT232R for both ftd2xx and ftdi low level drivers. The FT232R is used on the Arduino Duemilanove, where you can solder 4 pins to have access to the GPIOs of the chip: http://smileymicros.com/blog/2011/06/10/serial-communications-part-3-arduino -volt-meter-and-ft232r/ I also made a special USB cable in order to make the FTDI chip and the Atmega run in 3.3v: http://www.zoobab.com/arduino-duemilanove-in-3-3v -- Benjamin Henrion <bhenrion at ffii.org> FFII Brussels - +32-484-566109 - +32-2-3500762 "In July 2005, after several failed attempts to legalise software patents in Europe, the patent establishment changed its strategy. Instead of explicitly seeking to sanction the patentability of software, they are now seeking to create a central European patent court, which would establish and enforce patentability rules in their favor, without any possibility of correction by competing courts or democratically elected legislators." ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ UrJTAG-development mailing list UrJTAG-development@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/urjtag-development
