Geert Stappers: > On Wed, Jun 19, 2019 at 03:02:33PM +0200, k...@aspodata.se wrote: > > Hello urjtag, > > I have a paralell port adapter as in the attached schematic, > > and I would like to make it work with urjtag. > > > > It seems that the parport code is in various c files in > > urjtag-git/urjtag/src/tap/cable > > one per adapter: > > arcom.c > > byteblaster.c > > dlc5.c > > ea253.c > > ei012.c > > keithkoep.c > > lattice.c > > minimal.c > > mpcbdm.c > > triton.c > > wiggler.c > > wiggler2.c > > of theese only the last four have support srst (I guess) and > > wiggler.c differ much from the others. > > > > arcom.c ea253.c ei012.c lattice.c are very similar to each other > > so thoose four could probably be merged in a generic file with > > a data structure to make up for the differences, one could possible > > copy parts of the openocd parport driver, which has such a structure > > for all the parport adapters. > > > > Which .c file do you recommend as a starting point to code for > > my adapter ? > >
Hello Geert, nice of you to respond, but did you have anything to write (you just quoted my message and stopped there) ? Regards, /Karl Hammar _______________________________________________ UrJTAG-development mailing list UrJTAG-development@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/urjtag-development
