On 11/12/21 15:22, Milan Obuch wrote:
On Fri, 12 Nov 2021 14:26:32 +0100
Hans Petter Selasky <[email protected]> wrote:
On 11/12/21 14:25, Hans Petter Selasky wrote:
hw.usb.quirk.0="0x1514 0x0001 0 0xffff UQ_MSC_NO_SYNC_CACHE"
hw.usb.quirk.0="0x1514 0x0001 0 0xffff UQ_NO_STRINGS"
Should be "1" for second quirk.
hw.usb.quirk.0="0x1514 0x0001 0 0xffff UQ_MSC_NO_SYNC_CACHE"
hw.usb.quirk.1="0x1514 0x0001 0 0xffff UQ_NO_STRINGS"
--HPS
Thanks for hint, it works now. For some reason, only one quirk works on
system under test (it is 12.2-STABLE, r368192). I checked it with
'usbconfig dump_device_quirks', just the second one was shown. For
completeness, necessary lines in loader.conf files are
usb_quirk_load=YES
hw.usb.quirk.0="0x1514 0x0001 0 0xffff UQ_NO_STRINGS"
hw.usb.quirk.1="0x1514 0x0001 0 0xffff UQ_MSC_NO_SYNC_CACHE"
(I think UQ_NO_STRINGS could be omitted, did not test without, but
'usbconfig dump_device_quirks | grep 1514' outputs just
VID=0x1514 PID=0x0001 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_MSC_NO_SYNC_CACHE
nothing more.)
I am reading from /dev/da0 now... next check would be write, I'll test
later. If you'd like me to test anything else, just drop a note.
Again, thanks for help.
FYI:
/usr/src/tools/tools/usbtest
--HPS
