Gene, Have you been able to use the KeySpan USB to Serial adapter under OS X yet?
Bill Vlahos On Monday, January 21, 2002, at 08:36 AM, Gene Kennedy wrote: > Hi David, > > Yes it is possible to use RR to control/communicate with devices over > serial porst > using a USB-only Mac. You need to buy a KeySpan USB to Serial adapter > (or some > other competing device). If you buy a new one you can configure the > adapter to > emulate both the "Printer" and Modem" ports which are then accessable > through RR. > If you buy an older version of the adapter (through ebay or some such > outlet) you > can will be able to access the printer port but probably not the modem > port. > KeySpan's drivers were updated along the way to provide modem port > emulation. I > have not tried an adapter with the X-10 software yet but, I do have a > number of RR > applications running 24/7 using serial communications via KeySpan > adapters. > > Best regards, > Gene Kennedy > > > >> Message: 7 >> Date: Mon, 21 Jan 2002 13:24:10 +1100 >> Subject: Read serial data? >> From: David Vaughan <[EMAIL PROTECTED]> >> To: [EMAIL PROTECTED] >> Reply-To: [EMAIL PROTECTED] >> >> Is it possible to read serial data on a Mac with USB ports? In the >> Transcript dictionary it refers only to reading Modem and Printer ports >> which are the old Serial/LocalTalk ports, and I am wondering if these >> commands will transpose to reading from the USB or if there is another >> command or technique. >> >> thanks >> David Vaughan > > _______________________________________________ > use-revolution mailing list > [EMAIL PROTECTED] > http://lists.runrev.com/mailman/listinfo/use-revolution _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
