On Tuesday, March 19, 2002, at 12:43 PM, Olaf Schmidtmann wrote:
> I am looking for a way to read data from a COM port continuously. > The device > measures electrical resistance and delivers values. Sadly I don�t > have any > interface specs so I want to find a way to interpret what I find > myself. Since you mention COM, I assume you are on Windows. Use a terminal program such as Hyperterminal to talk to the device. Fiddle with the port parameters such as the bit rate until you see something that might make sense. Note the bit rate and use it to set the serialControlString property just before your open. If you can't make any sense at any bit rate, the data might be in binary. That is, most bytes sent are not meaningful as an ASCII code. This can be painful to analyze and you might want to harass the manufacturer for details. Or you can try using your Revolution stack to read in uint (or convert later) and looking for patterns. You might need to borrow a 'scope if experiments don't get you a reasonable guess on the bit rate. You can also use the terminal program to test your COM script. Connect a null modem cable between COM1 and COM2. Open one with the terminal program and open the other with your script. (You can also use two computers.) From your description, I have assumed the device repeatedly sends data without stimulus from the computer. However, it may be it needs a "command" from the computer. You might be able to get this by the same loop-back method as above. Run the terminal program first and then the current software. (One of my mid-term goals in using Revolution is to make some portable tools that can be used in analyzing situations like this. LabView might be better for that, but it is expensive.) I'm working on a simple card for some serial tests, but I have to put that off for a couple days. Let us know how this works out for you. Dar Scott _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
