At 1:23 PM +0100 3/22/02, Pierre Delain wrote: >> On 14/3/02 11:04 pm, Pierre Delain <[EMAIL PROTECTED]> wrote: >> >>> I have a stack with about twenty fields. In two of them (forming a group), >>> the insertion bar does not appear when I click (of course the fields are not >>> locked). I don't understand what happens, I search for a while and finally I >>> discover that if I ungroup those two fields the insertion bar normally >>> reappears. If I group them again, the bar re-becomes invisible... >>> >>> How can this strange phenomenon be explained and avoided? >> >> Is something layered on top of the group? Does the group have its "Can >> receive focus" set to true? >> >> Kevin > >Yes "Can received focus" of the group is set to true. > >The layer of the group was 4. If asked for the number of layers. The answer >was 179. If I set the layer of the group to 180, the insertion bar comes >back, but disappears in the fields that are not in the same group. > >My conclusion is the following : the insertion bar is visible only in the >group with the highest layer. This means that if you want to show two fields >belonging to different groups with different layers, the insertion bar will >lack in one of them, unless you change the layer. Is it correct?
I created a simple test stack with 1.1.1rc1 where this works. Here's my recipe: 1. create four fields, arranged 2x2 like this: field1 field2 field3 field4 2. I grouped field1 and field2, and then grouped field3 and field4 Insertion points can be had in all four fields. -- regards, Geoff Canyon [EMAIL PROTECTED] _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
