Hi Jan Thanks for your persistence! I am using the latest Download of RunRev (version 1.1.1). A text transfer works perfectly. I have pasted a typical log field below, and nothing looks particularly wrong, unless I'm missing something (I hope I am!). I have also played around with active/passive modes, but both yield the same result. The transfer succeeds, but the resulting file on the server is 0 bytes long. I am using the Starter Kit version of Revolution, but should this make a difference?
-220 Serv-U FTP-Server v2.5k for WinSock ready... -331 User name okay, need password. -230 User logged in, proceed. -257 "/poolcreative" is current directory. -200 Type set to I. -200 PORT Command successful. -150 Opening BINARY mode data connection for testfile.gif. -226-Maximum disk quota limited to 50000 Kbytes - Used disk quota 25862 Kbytes, available 24137 Kbytes -226 Transfer complete. Cheers Brendan -------------------------------- Message: 16 Date: Sun, 29 Sep 2002 04:39:31 -0700 (PDT) From: Jan Schenkel <[EMAIL PROTECTED]> Subject: Re: FTP problem (Jan Schenkel) To: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] Hi Brendan, Have you tested if it works with the data from a field -- so just plain text data? Are you using the latest LibURL package? It's available on the RunRev website. One other thing you could do is check the error log and see if it gives you any clues: - on the same card as the scipt you're using to upload, create a scrolling field "FTP_log" - just before you send anything upstream, insert the following line in your script: libUrlSetLogField the long name of field "FTP_log" This will show you the results of the commands as you would have seen them if you had gone to the command console and typed "ftp example.net", etc. I'm sure we can get your script on track once we figure out where exactly it's going wrong. Jan Schenkel. _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
