Perhaps I should try setting the top margin to a negative number :-)
Sarah
On Monday, November 25, 2002, at 11:06 am, Richard Gaskin wrote:
Sarah wrote:I have a problem with printing the bottom portion of a card. It prints
the correct bit of the card but I can't get it to start at the top left
of the paper, it always prints down the page as if leaving room for the
non-printed section of the card.
Here is my setup:
The card is 723 pixels wide x 560 high.
The page setup is for A4 paper in landscape mode.
This gives a printPaperSize of 841,595 (with the default printMargins)
I want to print the card from 4,157 to 719,554.
Here is the command I am using:
print this card from 4,157 to 719,554 into 72,72,697,451
Surely this should make the printout start 1 inch from the top and 1
inch from the left of the paper. It looks like it starts 1 inch from
the left but about 3 inches from the top.
If anyone has any suggestions I would be most grateful. I use Mac OS X
10.2.2, Rev 1.1.1
You may need to adjust the printmargins global property.-- Richard Gaskin Fourth World Media Corporation Developer of WebMerge 2.1: Publish any database on any site ___________________________________________________________ [EMAIL PROTECTED] http://www.FourthWorld.com Tel: 323-225-3717 AIM: FourthWorldInc _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
_______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
