Sarah, I wish that was the answer, but my command is not split over multiple lines (the list server did that). I also have tried the put quote method. My next approach/attempt will be as follows:
1 - A button script will use my variables (including myServerIP) and will create Transcript code via concatenation into a text field. The result of this will be Transcript commands which contains an actual IP address. 2 - I will use the command > set the script of someOtherButton to fld "magicScript". 3 - I will send mouseUp to someOtherButton. This should work around the glitch I have been experiencing since I won't be trying to execute concatenated commands on the fly. The commands will be as if they were hard-coded. What do you think? This should work - I think. Roger Eller [EMAIL PROTECTED] --------------------------------------- on 1/15/2003 at 5:26:45 PM, Sarah <[EMAIL PROTECTED]> wrote: > I haven't done any FTP stuff myself, but I expect that the command > being split over 2 lines is the problem. If not, perhaps it would work > if you sent the IP address enclosed in quotes e.g. > > put quote & myServerIP & quote into myServerIP > -- then use your command. > > Don't forget that if you want to split a single line of script over 2 > lines, you can use a backslash > answer "Here is a long " & \ > "piece of text." > > Cheers, > Sarah _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution