Ok -second thoughts this approach is rubbish, as the result is a function! Is it possible to determine when the save command has completed (and the result should appear valid)?
Steve >Hi Eric >Yes I am aware of this and the first attempt had the test directly after >the save. The delay was put in to see if this cured the problem. >I think you missed the point though. The problem I have is that saving over > a network can take some time, several seconds and it seems that Rev >continues straight after the save command but the result is only updated >with a fail if the save itself times out or hits some other problem. This >can be several seconds later and until this time, the result is empty. By >the time it comes back, Rev is well gone! >I wonder.. not tried this but can the result be set by script before the >save command , then Rev updates with either empty or unsuccessful at the >end of the save. Won't work if Rev modifies the result when the save >command is issued. >Such as: >Set the result to "saving" >Save this stack >Repeat until the result is not "Saving" >End Repeat >Test the result... >Can't test this myself unfortunately as I'm not accessing the PC with Rev >on it.. >Cheers >Steve _______________________________________________ use-revolution mailing list [email protected] Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-revolution
