Hi Steve,
Unfortunately, I can't save over a network at the moment but I made
an experiment:
on mouseUp
local tStart
-----
put the milliseconds into tStart
save this stack as (the filename of this stack)
put the milliseconds - tStart
end mouseUp
I ran this test several times with a fresh new stack then adding some
large images to it:
Obviously, saving delay was completely related to the weight of the
stack:
5 ms for a blank stack until 100 ms after having added some large
images.
Conclusion: saving is blocking at least on the same machine.
Now over a network, I am not able to test at the moment :-(
Le 20 janv. 08 à 19:57, Stephen King a écrit :
Hi Eric
Yes I am aware of this and the first attempt had the test directly
after the
save. The delay was put in to see if this cured the problem.
I think you missed the point though. The problem I have is that
saving over
a network can take some time, several seconds and it seems that Rev
continues straight after the save command but the result is only
updated
with a fail if the save itself times out or hits some other
problem. This
can be several seconds later and until this time, the result is
empty. By
the time it comes back, Rev is well gone!
I wonder.. not tried this but can the result be set by script
before the
save command , then Rev updates with either empty or unsuccessful
at the end
of the save. Won't work if Rev modifies the result when the save
command is
issued.
Such as:
Set the result to "saving"
Save this stack
Repeat until the result is not "Saving"
End Repeat
Test the result...
Can't test this myself unfortunately as I'm not accessing the PC
with Rev on
it..
Cheers
Steve
In order to get a reliable value in the result function, the result
*must* be tested immediately after the command:
save this stack
if the result <> empty then...
No code between these two lines. Never.
If you need it, you may write:
save this stack
put the result into tResult
<additional code>
if tResult <> empty then...
Best regards from Paris,
Eric Chatonet.
----------------------------------------------------------------
Plugins and tutorials for Revolution: http://www.sosmartsoftware.com/
Email: [EMAIL PROTECTED]/
----------------------------------------------------------------
_______________________________________________
use-revolution mailing list
[email protected]
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
http://lists.runrev.com/mailman/listinfo/use-revolution
