Edwin, I can successfully:
set the imagedata of img 1 of stack "Untitled 2" to the imagedata of img 1 of stack "Untitled 1" I've tested it on RR 1.5 and 2.0 -Chipp > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Edwin Gore > Sent: Friday, July 25, 2003 8:38 PM > To: [EMAIL PROTECTED] > Subject: RE: RE: moving images between stacks > > > Chipp, > > Both of the images are the same width and height. > > The transcript I am using is: > > set the imagedata of image "default" to the imagedata of image > "default" of card 1 of stack fromFile > > fromFile is the name of the old stack, and the new stack is set > as the defaultstack, and I am on the card where the images are. > What I now get is a black image in the new stack. The behavior I > was getting earlier was because I had a typo in the second > imagedata (it read imagesata) > > > >----- ------- Original Message ------- ----- > >From: "Chipp Walters" > >To: <[EMAIL PROTECTED]> > >Sent: Fri, 25 Jul 2003 17:15:29 > > > >Edwin, > > > >make sure both images are the same width and > >height, then: > > > >set the imagedata of img "new" to the imagedata of > >img "old" > > > >--Chipp > > > _______________________________________________ > use-revolution mailing list > [EMAIL PROTECTED] > http://lists.runrev.com/mailman/listinfo/use-revolution > _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
