>On 2/25/04 11:43 PM, David Squance wrote: >> >> Well, I remembered a short while ago seeing in the docs that an area of a >> card can be specified for printing, eg 0,0 to 500,300 (or the mouseloc, in >> their example). So I dumped the mask button and tried that. No joy. Any >> more suggestions gratefully received. > >Have you tried isolating the problem to see if it is the printer driver >or actually the stack? I guess the next thing I'd try is to print to a >PDF file. If that works, then it would be the print driver causing the >hang. > >You'll have to show the print dialog to print to PDF, if your scipt >isn't doing that already. > >How about other stacks? Can you print from one of those okay?
I tried printing a card from the previous project [the one you'd helped me with the cloning problem] and had the same problem. This is a recent problem. I printed successfully from both projects until a couple of days ago. I haven't tested printing with another printer or on a different computer/platform since the hang up probem started. I don't know how to set things to print to a pdf file. My printer driver (all I get with the 'answer printer' command) has very little control. (It's an Epson 740i and I can't even select black and white). The page setup only appears to be available when printing fields. Printing cards is not mentioned in the docs under 'revShowPrintDialog'. I don't have any problem printing from other apps, though most of them are classic, and the dialog is much better (IMHO). Dave _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
