Hello guys,
Is this possible on the Mac? I would love to 'find' a cnc and work on some ideas I have. Can you guys let me know what you are up to with this.
Thanks
Tom
On Jul 8, 2004, at 5:41 PM, Mark MacKenzie wrote:
Great!! I suspected as much. I expect I will have the same problems. However, I need to make this work and will put a fair bit of effort into it. As a "jackleg" tool and die machinist in an other life I might manage to triumph over the vagaries of inanimate objects such as CNC drills taking on a life of their own. Or maybe this will be the beginning of a bad science fiction novel gone real!
Can't wait to see your work. Thank you in advance.
Mark MacKenzie
Mark Wieder wrote:
Mark-
I started on a CNC controller some time last year. I'll dig out what I've got and send it to you. The hard part isn't figuring out the CNC protocol (the "G" commands and such) but getting the controller part right so you don't snap off drill bits or have things flying across the room.
_______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
Thomas J. McGrath III SCS 1000 Killarney Dr. Pittsburgh, PA 15234 412-885-8541
_______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
