It turns out that the server service has just started a TCP alternative, so I tried Alex Tweedly's TCP server and client.
These two stacks run successfully on both the same computer and two that I have on my network, either with DHCP address or each having a static IP address. Now the outside world... Adjusting firewall and my client settings, I can get "Success: opened server.i.p.addr:8882" where the actual IP address is shown, so I assume this is a handshake. The tech group reports back that (including word wrap, addr chgd) : -------------------------------------------------------------- We are seeing the following in the sdlear/tcpip log: 060526 08:16:19 Accepting TCP Connection from dd.234.99.999:33142 060526 08:17:42 send error: WSACONNABORTED 060526 08:17:42 Releasing TCP Connection from dd.234.99.999:33142 (0 00:01:23) 060526 08:24:04 Accepting TCP Connection from 24.234.99.999:32776 060526 08:38:50 send error: WSACONNABORTED 060526 08:38:50 Releasing TCP Connection from 24.234.99.999:32776 (0 00:14:46) 060526 09:04:25 Accepting TCP Connection from 24.234.99.999:32832 060526 09:05:27 Accepting TCP Connection from 24.234.99.999:32834 060526 09:05:32 send error: WSACONNABORTED 060526 09:05:32 Releasing TCP Connection from 24.234.99.999:32832 (0 00:01:07) 060526 09:10:52 Accepting TCP Connection from 24.234.99.999:63559 WSAECONNABORTED (10053) Translation: Software caused connection abort. Description: An established connection was stopped by the software in your host computer, possibly because of a data transmission time-out or protocol error. ------------------------------------------------------ I get this both on G5 dual, OSX 10.4.6, Rev 2.6.1 Duo Mini, OSX 10.4.6, Rev 2.6.1 or 2.7.1 build 236 This is getting a little deep for me, since I am not a networking or socket guy. It seems that Rev is almost up to the task. If I can figure this out, I will put together some example and test stacks so others can learn. I could possibly host some stacks for live testing that others could use. My deadline for getting this solved is about 5 days from now, so hopefully I can learn all the details I need to make this happen. Questions: Since UDP works on the G5/10.4.6, but not DuoMini/10.4.6 [starts to get messages, then crashes Rev w/EXEC_BAD_INSTRUCTION (0x0002)] on BOTH 2.6.1 and (2.7.1 build 236 installed today 5.26.06) Since TCP would be the most desirable method, is there a test server I can use? Thanks for any advice in advance. Jim Ault Las Vegas _______________________________________________ use-revolution mailing list [email protected] Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-revolution
