Finishing Range (Benninger, Stentex, Intra): Dual Large Capacity Load-Cell Electronic Tension Controlled Center Guided Let-off
Auto-Sew Rail with Dual Buttseamers Intra Dual 60 Second Entry Accumulators with Limit Controls Benninger Saturator with Automated Chemical Mix and Fill System, Steam Injection Heating Benninger Injecta Unit with Automated Fill, Steam Injection Heating Benninger Impacta Unit (Dip Tank) with Automated Fill, Steam Injection Heating Benninger Wash Box (Wash Box 1) with Automated Fill, Steam Injection Heating Benninger Wash Box (Wash Box 2) with Automated Fill, Steam Injection Heating High-Capacity Vacuum Slot for Moisture Removal with Filtered Reclaim System Benninger Impacta Unit (Dip Tank) with Automated Fill, Steam Injection Heating 200 Gallon Stainless Steel Heat Exchanger for Process Water Recycling Zone Tension Control via Electronically Controlled Pneumatic Compensators FactoryLink HMI Software Includes Data Trending, Energy Management, Unlimited Recipes Wash-Section is Reliance Electric PLC / Computer Controlled with Digital AC Drives Stentex Stentotherm 3300 Pin Type Tenter Frame, Age 1994, (Max. Width 80", Min. Width 26"), over and under pin chain, overfeed, E & L guiding. 8 Independently Controlled Drying Zones with Dedicated Circulation Fans, Gas Fired. Zone Tension Control via Pneumatic Compensators Each Heating Zone is Equipped with Honeywell Digital Flame-Safety Controls and Overtemp Pneumatically Actuated Upper and Lower Air-Flow Controlled from Touch- Screen 2 AC Inverter Controlled Variable Speed Exhaust Fans Width Control is Variable in 3 Zones Utilizing a Motor Driven Screw System Two Speed Cooling Zone Tenter is Equipped with Automated Lubricating, De-Pinning, Tail-Out and Pin-Cleaning System Tenter Operator Controls are Located at the Front and Back of the Machine Tenter is Siemens S5 PLC / Computer Based Control with and Integrated Touch-Screen Tenter is Digital DC Drive Controlled by Control Techniques Mentor II Drives Mahlo Computer controlled Pick Counter with Entry, Mid and Exit Displays Full Roll Defect Mapping with Hard copy or Data Disk Capability Edge Marking System for Defect Area Indication Intra Single 60 Second Exit Accumulator with Limit Controls Dual PTO Type Center-Wind Take-Ups with Adjustable Load Cell Tension Control Take-Up is Change-On-The-Fly with an 8,000 Yard per Bay Capacity Maximum Machine Speed is 75 YPM MUST MOVE THIS EQUIPMENT FAST. Richard Zelickson Shaffer & Max International, Inc. 1618 Camden Rd. Charlotte, NC 28203 Email: [email protected] Website: www.shaffermax.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Used Textile" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/usedtextile -~----------~----~----~----~------~----~------~--~---
