Dear Sir & Madam:
We are pleased to offer the following equipment at reduced price:
1997 year POY lines
SUMMARIZING TABLE OF SPINNING MACHINERY
280 dtex yarn-medium count
Production capacity : 9.960 Kgs./24 hours
* * pilot line
* ° waste recycling line
SPINNING LINES DESCRIPTION (year of construction 1997)
A Line (4 sections) production 3.000 kg/day final
count 150 den white or coloured
Composition of each autonomous section:
* molecular sieve dehumidificator with closed circuit for the process’air
* cristallizer/dryer for 40 kg/h for chips base
* cristallizer/dryer for 5 kg/h for coloured
master with automatic granules’ loading
* volumetric dosing system for master bach
* extruder diam. 45 mm
* spinning head with a crown pump and 6 parcels of rectangular spinnerets
* dowtherm heating system
* blow cell with enziming and entangling threadlines
* winder with six compresses
each section can produce independently from the
others a different count and colour.
B Line production 1.000 kg/day final count 150 den white or coloured
The line can serve as a production plant, such as
the pilot plant, as it allows to work PET PP
using godet, revolver-type winder, dowtherm
heating system with and without vacuum.
Composition:
* molecular sieve dehumidificator with closed
circuit for the process’air (temperature up to -70°C.)
* cristallizer/dryer for 40 kg/h for chips base
* cristallizer/dryer for 5 kg/h for coloured
master with automatic granules’ loading
* volumetric dosing system for master bach
* extruder diam. 45 mm
* spinning head with two crown pumps and 8
parcels of round spinnerets with rapid clutch
* dowtherm heating system
* blow cell with enziming and entangling threadlines
* winder with three hot godets and eight compresses
each section can produce independently from the
others a different count and colour.
C and D Lines production 2.000 kg/day each one
with final count 150 den white or coloured
The two lines have in common the air-treatment
for cips drying (Munter lithium chloride dehumidificator with open circuit)
Composition of each line:
* cristallizer/dryer for 100 kg/h for chips base
* cristallizer/dryer for 8 kg/h for coloured
master with automatic granules’ loading
* volumetric dosing system for master bach
* extruder diam. 75 mm
* spinning head with eight polimer dosing
pumps and 8 parcels of double rectangular spinnerets
* dowtherm heating system
* eight blowing cells with enziming and entangling threadlines
* four winders with four compressors
R Line (4 sections) production 150 kg/hour
The line is used for the recovering of the wastes in various steps of working.
Composition :
- grinding mill
- small heap silo
- volumetric dosing system
- pre-heater
- extruder diam 75mm
- spinning pump and head with spinneret for chips
- quenching tank, drying
- cutting
- transporting device to silo
Each line is commanded by means of an independent
console which visualizes all the parameters like
temperature, pression, etc, at the same time the
winders have a semiautomatic robots for taking-off.
Spinning ancillary equipment
* Stocking and pneumatic transporting system
for master and chips (three cement silo covered
by inox steel inside, compressors, automatic valves and so on).
* Winding and blowing air conditioning,
composed of a preparation station, filtration,
washing and humidification with separate humidity
and temperature regulation for zone and line
(refrigerated water batteries, hot water
baterries and electrical resistances), with relative regains.
* Chiller for refrigerated water with two
custom pack closed-circuit refrigerators temp.
4/5°C which serve the dryers’ process air
dehumidificators, into the chips-feeding tubes
towards the dryers, in the conditioning for the
air humidity and in the compressors.
* A centralized compressed-air plant with two
screw-compressors of 10 bar and a suitable
stocking, dehumidifying and deoiling systems with a relative control system.
* Diathermic oil plant with two gas generators temp. up to 250°
* Hot water (90°) gas heated plant for the conditioning and heating.
* Transformation cabin MT/BT 1200Kw and a
suitable network. Buffer battery for the spinning
lines with a guaranteed working time of 10 min.
* Power-boards room for the spinning lines
* Spinnerets’ laborotory for cleaning and
preparation of spinnerets parcels with burning
oven, sander and pre-heating oven.
* Chemical textile laborotory for the complete yarn checking.
* Enziming oil preparation system with a
demineralizer and plastic reinforced by fiber glass tanks.
* Gas ramp for the azote distribution on the
extruders chips’ entry bodies.
* Quality control and POY packing zone.
Price mill
floor-------------------------------------------------------------Euro 550,000
Price CFR major
ports--------------------------------------------------Euro 770,000
Please advise of interest
Regards
Victor Capeluto
CAROLINA TEXTILE MACHINERY, INC.
TELEPHONE (704) 843-1770
P.O. Box 77996, Charlotte, NC 28271-7022 U..S.A.
E-MAIL:
<http://mc/[email protected]>[email protected]
WEBSITE: <http://www.carolinatextile.com/>http://www.carolinatextile.com
SKYPE: textilemachineryinc
NOTICE The informations transmitted in this
e-mail, and any attachments thereto, are intended
only for the person or entity to which it is
addressed and may contain confidential and/or
privileged material. Any review, re-transmission,
dissemination or other use of, or taking of any
action in reliance upon, these informations by
persons or entities other than the intended
recipient is prohibited. If you received this
e-mail in error, please contact the sender and
delete the material from any computer. If you
like to be removed from our mailing list, send a
blank message with subject: Remove.
--
You received this message because you are subscribed to the Google Groups "Used
Textile" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at http://groups.google.com/group/usedtextile
