REFERENCE NUMBER: G-5717
HOUGET DUESBERG CARDING AND SPINNING LINE
A) HOUGET DUESBERG BOSSON SPINNING FRAME (SPINDLES ON ONE SIDE ONLY)
YEAR : 1985
GAUGE: 120mm
B) HOUGET DUESBERG BOSSON SPINNING FRAME (SPINDLES ON BOTH SIDES)
YEAR: 1980
GAUGE: 120mm
LICKERIN DIAMETER: 600mm
MAIN CYLINDER: 1300mm
DOFFER: 900mm
STRIPPERS: 100mm
WORKERS(GRANDE): 220mm
HOUGET DUESBERG BOSSON CARDING LINE
FIRST SECTION & SECOND SECTION
HOUGET D.B. CARDING LINE
HOUGET D.B. CARDING LINE
HOUGET D.B. CARDING LINE
WORKERS & STRIPPERS
NOTE: ALL THE WORKERS AND THE STRIPPERS HAVE THE ABOVE MEASUREMENTS.
NOTE: ON THE HEAD END THERE ARE 12 ROLLERS. THE WIDTH OF THE ROLLERS IS
840mm
BEFAMA CARDING LINE
(1) BEFAMA HOPPER
WORKING WIDTH: 1720mm
(1) BEFAMA CARD
WORKING WIDTH: 1800mm
BEFAMA CARDING LINE
LICKERIN & STRIPPERS
SMALL CYLINDER: 100mm
MAIN CYLINER: 210mm
HEAD END:
WIDTH OF THE BAND: 1910mm
WIDTH OF THE ROLLERS ON HEAD END: 805mm
NR. OF ROLLERS ON THE HEAD END: 12 ROLLERS
PICTURE #10 BEFAMA SPINNING FRAME
(1) BEFAMA SPINNING FRAME
NOTE: THERE IS NO PLATE
NR. OF POSITIONS: 160 ON EACH SIDE
HEIGHT OF SPINDLES: 570mm
GAUGE: 120mm
DIAMETER OF RING: 95mm
NR. OF BACK ROLLERS: 26
NR. OF BACK ROLLERS POSITIONS: 13
WIDTH OF BACK ROLLERS: 805mm
NOTE: IT HAS A MOTORS, ONE MOTOR ON EACH SIDE OF THE SPINNING FRAME
PICTURE #11 CLOTH SHREDDER
(1) CLOTH SHREDDER MADE IN POLAND
WORKING WIDTH: 1200mm
YEAR: 1978
NR. OF ROLLERS: 9
PICTURE #12 DAVIS & FURKER CLOTH SHREDDER
(1) CLOTH SHREDDER
BRAND: DAVIS & FURBER
YEAR: 1937
WORKING WIDTH: 1240mm
NR. OF ROLLERS: 9
PICTURE #13 GALAN SPINNING FRAME
GALAN SPINNING FRAME MADE IN SPAIN
PLATE INFO:
MODEL: CHFT/MP
RING: 90 1450
DATE: 10/1990
NR. OF POSITIONS: 230 (MACHINE HAS ONLY ONE SIDE)
HEIGHT OF THE SPINDLES: 460mm
HEIGHT OF BOBBIN: 450mm
RING DIAMETER: 85mm
NO SEPARATORS ON THE MACHINE
GAUGE: 120mm
NR. OF BACK ROLLERS: 10
NR. OF BACK ROLLERS POSITIONS: 10
WIDTH OF BACK ROLLERS: 2880mm
PICTURE #14 BEFAMA SPINNING FRAME
HOUGET DUESBERG BOSSON CARDING LINE
(1) HOUGET DUESBERG BOSSON HOPPER
YEAR: 1971
WORKING WIDTH: 87 INCHES
(1) SMALL FEED ROLLERS
(2) SMALL PRESS ROLLERS
(1) DOFFER : WIDTH 2200mm
(3) FIRST WORKERS
(5) WORKERS ABOVE MAIN CYLINDER
(5) STRIPPERS ABOVE MAIN CYLINDER
(1) MAIN CYLINDER
(1) AVANTREN
(1) FEED ROLL
(5) STRIPPERS
(5) WORKERS
(1) MAIN CYLINDER
(1) SMALL CYLINDER
(1) ROLL BEFORE AVANTREN
AVANTREN ON COMB
(1) MEDIUM STAINLESS STEEL ROLL BEFORE TAKE-OFF ROLL
(1) PAIR OF TAKE-OFF STAINLESS STEEL ROLLS
(1) TRANSPORT APRON
SECOND SECTION
(1) FEED APRON
(1) SMALL FEED ROLL
(2) SMALL PRESS ROLLS
(1) DOFFER
(3) SMALL ROLLS ABOVE THE DOFFER
(1) AVANTREN
(1) MEDIUM TRANSPORT ROLL
(5) WORKERS
(5) STRIPPERS
(1) MAIN CYLINDER
(1) SMALL CYLINDER AT MAIN CYLINDER EXIT
(1) MEDIUM CYLINDER AT MAIN CYLINDER EXIT
MAIN ROLL SECTION
(1) DOFFER
(1) MEDIUM FEED ROLL
(5) WORKERS
(5) STRIPPERS
(1) MAIN CYLINDER
(1) SMALL ROLL AT EXIT OF MAIN CYLINDER
(1) MEDIUM ROLL AT EXIT OF MAIN CYLINDER
(1) MEDIUM ROLL AT EXIT OF MAIN CYLINDER
(1) COMB
(1)RUB RUBBING EXIT UNIT WIDTH: 2300mm
PICTURE #15
(1) P. GARDENAS WOOL CARD WORKING WIDTH: 2280mm
SABADELL, ESPANTA(NOTE: NO PLATE INFORMATION)
(1) PEDRO GARDENAS HOPPER WORKING WIDTH: 2230mm
(4) PRESSING FEEDING ROLLERS DIAMETER: 65mm
(1) LICKERING DIAMETER: 300mm
(1) AVANTREN DIAMETER: 1000mm
WITH (4)WORKERS: 100mm
(4)STRIPPERS: 150mm
(1) TRANSFER ROLL DIAMETER: 400mm
(1) MAIN CYLINDER DIAMETER: 1400mm
WITH (6)WORKERS: 100mm
(6)STRIPPERS: 200mm
(1) DOFFER DIAMETER: 1200mm
(1) COMB
(1) CALENDER WITH (2) S.S. CYLINDERS DIAMETER: 300mm
(1) APRON
SECOND SECTION
(1) APRON
(4) PRESSING FEEDING ROLLERS DIAMETER: 65mm
(1) LICKERIN DIAMETER: 300mm
(1) MAIN CYLINDER DIAMETER: 1400mm
WITH (6)WORKERS DIAMETER: 100mm
(6)STRIPPERS DIAMETER: 200mm
(1) TRANSFER ROLL DIAMETER: 350mm
(1) DOFFER DIAMETER: 1250mm
THIRD SECTION
(1) TRANSFER ROLL DIAMETER: 400mm
(1) MAIN CYLINDER DIAMETER: 1400mm
WITH (6)WORKERS: 100mm
(6)STRIPPERS: 200mm
(1) TRANSFER ROLL DIAMETER: 350mm
(1) DOFFER DIAMETER: 1250mm
(1) COMB
(1) HEAD END
BELT WIDTH: 2290mm
ROLLERS' WIDTH: 840mm
NR. OF ROLLERS: 12 POSITIONS
PICTURE #16
(1) BEFAMA SPINNING FRAME
NOTE: IT HAS TWO SIDES AND ONE MOTOR PER SIDE
NR. OF POSITIONS: 360 TOTAL(180 POSITIONS ON EACH SIDE)
HEIGHT OF SPINDLE: 440mm
HEIGHT OF BOBBIN: 320mm
RING DIAMETER: 70mm
GAUGE: 110mm
TAG INFO:
TYPE: PG 7A
YEAR: 1984
NR. OF TOP ROLLER×SIDE: 10 ROLLERS
NR. OF ROLLERS ON BOTH SIDES: 20 ROLLERS
WIDTH OF TOP ROLLER: 835mm
Please contact us for more details.
Regards,
Victor LeBron
American Plant & Equipment
4200 South Church Street Ext.
Roebuck, SC 29376 USA
cell: 864-590-1700
Phone: 864-574-0404
Fax: 864-576-7204
NEW EMAIL: [email protected]
Website: www.americanplantandequipment.com
***If you no longer wish to receive mail from us, please reply to this
message with REMOVE in the subject line.***
--
You received this message because you are subscribed to the Google Groups "Used
Textile" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at http://groups.google.com/group/usedtextile
