Hello,Stefan.
You must select the surface which wants to make the curve with Face edit
mode first.
Best Regards
K-UDA
----- Original Message -----
From: "Beg-inner" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, July 28, 2007 1:42 AM
Subject: Re: Script to make curve.
Hi K-UDA
You are welcome..
and thank yoiu for sharing your script..!
well.. its not only displaying this error.. but no Curves are created..
only thing that happens is a new SDS objects is created..
the line you said I should add.. makes no difference (or was it just a
line that was needed anyway..?)
I cant understand what can be different in my RS setup...
Hopefully someone can figure out what is needed to get it to work, since
it seems like a very useful script..!
Take Care
Best Regards
( Beg-inner )
A Proud Owner and User of Real3D and Realsoft3D..
----- Original Message -----
From: "K-UDA" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, July 27, 2007 3:30 PM
Subject: Re: Script to make curve.
Hello, Stefan.
Thank you for your report.
I don't know why this error is displayed.
Please add the following cords to the 112nd line.
selected_count = 0;
Best Regards
K-UDA
----- Original Message -----
From: "Beg-inner" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, July 27, 2007 12:49 AM
Subject: Re: Script to make curve.
Hi K-UDA..
Seems like a very cool and nice script.. !
Thx for sharing it ...!
It dont work here though...
This error comes up when I click the 'Create Curve' button..
CURVE_GEN_001.JS:174
TypeError hairpice_sds_2.FACESTOTRIANGLES is not a Function
Error:r3mainw:8013
Take Care
Best Regards
Stefan Gustafsson ( Beg-inner )
A Proud Owner and User of Real3D and Realsoft3D..
----- Original Message -----
From: "K-UDA" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, July 25, 2007 3:32 PM
Subject: Script to make curve.
Hello List.
I wrote a script to create a curve. This script creates the nurbs curve
on the chosen SDS surface.
I wish this script helps the work of your modeling.
Download from the following page.
http://www2s.biglobe.ne.jp/~k-uda/INDEX-S1.htm
The simple direction for uses.
1.Select the SDS surface. 2.Click "Create curve" button. 3.Select the
nurbs curve in the SelectWindow. 4.Click "Bend curve" button. Best
regards,
K-UDA
