arch/x86/um/checksum_32.S had been copy & paste from x86. When build
x86 uml, csum_partial_copy_generic_i386 mess up the exception table.
In fact, exception table dose not work in uml kernel.
And csum_partial_copy_generic_i386 never been called. So, delete it.
Signed-off-by: Honggang Li <enjoymind...@gmail.com>
---
arch/x86/um/checksum_32.S | 239 ----------------------------------------------
1 file changed, 239 deletions(-)
diff --git a/arch/x86/um/checksum_32.S b/arch/x86/um/checksum_32.S
index 8d0c420..fa4b8b9 100644
--- a/arch/x86/um/checksum_32.S
+++ b/arch/x86/um/checksum_32.S
@@ -214,242 +214,3 @@ csum_partial:
ret
#endif
-
-/*
-unsigned int csum_partial_copy_generic (const char *src, char *dst,
- int len, int sum, int *src_err_ptr, int
*dst_err_ptr)
- */
-
-/*
- * Copy from ds while checksumming, otherwise like csum_partial
- *
- * The macros SRC and DST specify the type of access for the instruction.
- * thus we can call a custom exception handler for all access types.
- *
- * FIXME: could someone double-check whether I haven't mixed up some SRC and
- * DST definitions? It's damn hard to trigger all cases. I hope I got
- * them all but there's no guarantee.
- */
-
-#define SRC(y...) \
- 9999: y; \
- _ASM_EXTABLE(9999b, 6001f)
-
-#define DST(y...) \
- 9999: y; \
- _ASM_EXTABLE(9999b, 6002f)
-
-.align 4
-
-#ifndef CONFIG_X86_USE_PPRO_CHECKSUM
-
-#define ARGBASE 16
-#define FP 12
-
-csum_partial_copy_generic_i386:
- subl $4,%esp
- pushl %edi
- pushl %esi
- pushl %ebx
- movl ARGBASE+16(%esp),%eax # sum
- movl ARGBASE+12(%esp),%ecx # len
- movl ARGBASE+4(%esp),%esi # src
- movl ARGBASE+8(%esp),%edi # dst
-
- testl $2, %edi # Check alignment.
- jz 2f # Jump if alignment is ok.
- subl $2, %ecx # Alignment uses up two bytes.
- jae 1f # Jump if we had at least two bytes.
- addl $2, %ecx # ecx was < 2. Deal with it.
- jmp 4f
-SRC(1: movw (%esi), %bx )
- addl $2, %esi
-DST( movw %bx, (%edi) )
- addl $2, %edi
- addw %bx, %ax
- adcl $0, %eax
-2:
- movl %ecx, FP(%esp)
- shrl $5, %ecx
- jz 2f
- testl %esi, %esi
-SRC(1: movl (%esi), %ebx )
-SRC( movl 4(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, (%edi) )
- adcl %edx, %eax
-DST( movl %edx, 4(%edi) )
-
-SRC( movl 8(%esi), %ebx )
-SRC( movl 12(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, 8(%edi) )
- adcl %edx, %eax
-DST( movl %edx, 12(%edi) )
-
-SRC( movl 16(%esi), %ebx )
-SRC( movl 20(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, 16(%edi) )
- adcl %edx, %eax
-DST( movl %edx, 20(%edi) )
-
-SRC( movl 24(%esi), %ebx )
-SRC( movl 28(%esi), %edx )
- adcl %ebx, %eax
-DST( movl %ebx, 24(%edi) )
- adcl %edx, %eax
-DST( movl %edx, 28(%edi) )
-
- lea 32(%esi), %esi
- lea 32(%edi), %edi
- dec %ecx
- jne 1b
- adcl $0, %eax
-2: movl FP(%esp), %edx
- movl %edx, %ecx
- andl $0x1c, %edx
- je 4f
- shrl $2, %edx # This clears CF
-SRC(3: movl (%esi), %ebx )
- adcl %ebx, %eax
-DST( movl %ebx, (%edi) )
- lea 4(%esi), %esi
- lea 4(%edi), %edi
- dec %edx
- jne 3b
- adcl $0, %eax
-4: andl $3, %ecx
- jz 7f
- cmpl $2, %ecx
- jb 5f
-SRC( movw (%esi), %cx )
- leal 2(%esi), %esi
-DST( movw %cx, (%edi) )
- leal 2(%edi), %edi
- je 6f
- shll $16,%ecx
-SRC(5: movb (%esi), %cl )
-DST( movb %cl, (%edi) )
-6: addl %ecx, %eax
- adcl $0, %eax
-7:
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-
-6001:
- movl ARGBASE+20(%esp), %ebx # src_err_ptr
- movl $-EFAULT, (%ebx)
-
- # zero the complete destination - computing the rest
- # is too much work
- movl ARGBASE+8(%esp), %edi # dst
- movl ARGBASE+12(%esp), %ecx # len
- xorl %eax,%eax
- rep ; stosb
-
- jmp 5000b
-
-6002:
- movl ARGBASE+24(%esp), %ebx # dst_err_ptr
- movl $-EFAULT,(%ebx)
- jmp 5000b
-
-.previous
-
- popl %ebx
- popl %esi
- popl %edi
- popl %ecx # equivalent to addl $4,%esp
- ret
-
-#else
-
-/* Version for PentiumII/PPro */
-
-#define ROUND1(x) \
- SRC(movl x(%esi), %ebx ) ; \
- addl %ebx, %eax ; \
- DST(movl %ebx, x(%edi) ) ;
-
-#define ROUND(x) \
- SRC(movl x(%esi), %ebx ) ; \
- adcl %ebx, %eax ; \
- DST(movl %ebx, x(%edi) ) ;
-
-#define ARGBASE 12
-
-csum_partial_copy_generic_i386:
- pushl %ebx
- pushl %edi
- pushl %esi
- movl ARGBASE+4(%esp),%esi #src
- movl ARGBASE+8(%esp),%edi #dst
- movl ARGBASE+12(%esp),%ecx #len
- movl ARGBASE+16(%esp),%eax #sum
-# movl %ecx, %edx
- movl %ecx, %ebx
- movl %esi, %edx
- shrl $6, %ecx
- andl $0x3c, %ebx
- negl %ebx
- subl %ebx, %esi
- subl %ebx, %edi
- lea -1(%esi),%edx
- andl $-32,%edx
- lea 3f(%ebx,%ebx), %ebx
- testl %esi, %esi
- jmp *%ebx
-1: addl $64,%esi
- addl $64,%edi
- SRC(movb -32(%edx),%bl) ; SRC(movb (%edx),%bl)
- ROUND1(-64) ROUND(-60) ROUND(-56) ROUND(-52)
- ROUND (-48) ROUND(-44) ROUND(-40) ROUND(-36)
- ROUND (-32) ROUND(-28) ROUND(-24) ROUND(-20)
- ROUND (-16) ROUND(-12) ROUND(-8) ROUND(-4)
-3: adcl $0,%eax
- addl $64, %edx
- dec %ecx
- jge 1b
-4: movl ARGBASE+12(%esp),%edx #len
- andl $3, %edx
- jz 7f
- cmpl $2, %edx
- jb 5f
-SRC( movw (%esi), %dx )
- leal 2(%esi), %esi
-DST( movw %dx, (%edi) )
- leal 2(%edi), %edi
- je 6f
- shll $16,%edx
-5:
-SRC( movb (%esi), %dl )
-DST( movb %dl, (%edi) )
-6: addl %edx, %eax
- adcl $0, %eax
-7:
-.section .fixup, "ax"
-6001: movl ARGBASE+20(%esp), %ebx # src_err_ptr
- movl $-EFAULT, (%ebx)
- # zero the complete destination (computing the rest is too much work)
- movl ARGBASE+8(%esp),%edi # dst
- movl ARGBASE+12(%esp),%ecx # len
- xorl %eax,%eax
- rep; stosb
- jmp 7b
-6002: movl ARGBASE+24(%esp), %ebx # dst_err_ptr
- movl $-EFAULT, (%ebx)
- jmp 7b
-.previous
-
- popl %esi
- popl %edi
- popl %ebx
- ret
-
-#undef ROUND
-#undef ROUND1
-
-#endif
--
1.8.3.1
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
