Hi Richard, hi list. I have found a couple of minor issues which have crept up during porting from 3.3.8 to 3.12-3.15 (I originally wrote all of the improvements for 3.3.8/OpenWRT).
I will reissue the patchset with these fixed sometimes this week - descriptions of issues/coming fixes inline. I have tried to keep the network patches not invasive, but that is preventing the use of the write poll functionality in the new interrupt controller (there is no way to do that without starting to change the core uml netdev structures). It also prevents a few other potential performance improvements such as skb recycling on rx (to avoid allocating memory every time), etc. I probably will not have the time to get these done for a few weeks as I am snowed under a backlog of work too. Once these are done, TX CPU should drop significantly without losing the performance. RX should pick up as well to match TX for a lot of use cases. After patching 3.12 and running it for a while on a live system I have run again into my favorite UML issue (occasional process in D state on IO) is back :(. This is something which exists in the stock kernel, but is much more difficult to trigger because the way it the original timer (and to a lesser extent SIGIO) handling. I will add a workaround which does not fix it fully (but at least makes it extremely rare) to the patchset as well on next reissue. On 04/09/14 20:14, Richard Weinberger wrote: > On Thu, Sep 4, 2014 at 9:00 PM, <anton.iva...@kot-begemot.co.uk> wrote: >> Patch dependencies: >> >> [PATCH v3 01/10] Epoll based interrupt controller >> >> Full redesign of the existing UML poll based controller. The old >> poll controller incurs huge penalties for IRQ sharing and many devices >> setup due to the device list being walked twice. >> >> Additionally, the current controller has no notion of true Edge, >> Level and Write completion IRQs. >> >> This patch fixes the list walking bottleneck and adds all of >> the above alowing for UML to be scaled to 100s of devices >> (tested with 512+ network devices). I have found one minor issue - it needs the "turn off sigio" in the exit routine. >> >> [PATCH v3 02/10] Remove unnecessary 'reactivate' statements >> >> As a result of adding true Edge/Level semantics in the epoll >> controller there is no need to do the "reactivate fd" any more. >> >> This one is an enhancement of 1 and depends on it. >> >> [PATCH v3 03/10] High performance networking subsystem >> >> This patchset adds vector IO ops for xmit and receive. Xmit >> is optional (as it depends on a 3.0+ host), receive is always on. >> >> The result is that UML can now hit 1G+ rates for transports >> which have been enabled to use these. Presently this patchset >> is kept as "legacy" as possible without leveraging the possibility >> to do a true write completion poll from the new IRQ controller. >> This further performance improvement will be submitted separately. >> >> This patch has been tested extensively only with patchsets 1 and 2. There is a minor issue in the close(), it needs to call both the uml and linux interrupt release routines and at the moment it does not. >> >> [PATCH v3 04/10] L2TPv3 Transport Driver for UML >> >> This is an implementation of the Ethernet over L2TPv3 protocol >> leveraging both the epoll controller and the high perf vector IO. >> It has been extensively tested to interop versus a set of >> other implementations including Linux kernel, our port of the >> same concept to QEMU/KVM, routers, etc. There are a couple of "belts and braces" checks missing - it needs to zero the queue counter on a failed read (I have yet to see a single failed read in all my tests though). >> >> Depends on 3. >> >> [PATCH v3 05/10] GRE transport for UML >> >> Same as L2TPv3 for GRE. Depends on 3 >> >> [PATCH v3 06/10] RAW Ethernet transport for UML >> >> True raw driver (note - all TSO/GSO options in the NIC must >> be turned off). Breaks through the 1G barrier with a vengeance >> and CPU to spare. Depends on 3. >> >> [PATCH v3 07/10] Performance and NUMA improvements for ubd >> >> This is a well known issue/fix, qemu has the same one. If you >> do not use pwrite you can kill a machine on cache sync with >> ease. This patch is independent of the others. >> >> [PATCH v3 08/10] Minor performance optimization for ubd >> >> Obvious minor optimization, independent of the others. >> >> [PATCH v3 09/10] Better IPC for UBD >> >> Obvious optimization, independent of the others. Pipe has a >> very short queue which has 4k granularity. It is a bad IPC >> for passing a lot of small chunks one at a time as used in UBD. >> >> [PATCH v3 10/10] High Resolution Timer subsystem for UML >> >> This version of the patch applies only to the epoll controller. >> Otherwise, the patch with minimal modifications can be applied to >> stock UML. It fixes UML as far as its use for network appliance >> on all counts - TCP performance, QoS, traffic shaping, etc. >> >> The patch is not pretty (I would have preferred to kill itimer >> completely). It however does what it says on the tin and has been >> doing it in testing for 2 years or so now. >> >> Enjoy > Thanks a lot for your work! > As I'm horrible backlogged I'll at best have next week the time to > look at your patches. > > Thanks, > //richard > > ------------------------------------------------------------------------------ > Slashdot TV. > Video for Nerds. Stuff that matters. > http://tv.slashdot.org/ > _______________________________________________ > User-mode-linux-devel mailing list > User-mode-linux-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ User-mode-linux-devel mailing list User-mode-linux-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
