Hi All,
I am having trouble setting up networking with multiple UML instances on the
same machine.
The host machine is on a subnet with IP 128.105.104.106.
I am creating two UML instances and I want to make sure they both can
communicate with each other.
I do not want to use a bridge ( because I want all the packets to go through
the host machine so that I can play around with Click router simulator ).
I first tried creating two tap devices in the same subnet 192.168.0.0/24.
And I started two UML instances on each of these tap devices.
The first one could connect to outside world. But the second UML instance
had problems.
So, I tried with each of the tap devices on two different subnets like below
:
tap2 Link encap:Ethernet HWaddr 4E:E2:99:EE:A5:A1
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::4ce2:99ff:feee:a5a1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:524 errors:0 dropped:0 overruns:0 frame:0
TX packets:407 errors:0 dropped:27 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:55603 (54.2 KiB) TX bytes:62939 (61.4 KiB)
tap3 Link encap:Ethernet HWaddr C6:04:42:8B:80:47
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::c404:42ff:fe8b:8047/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:259 errors:0 dropped:0 overruns:0 frame:0
TX packets:94 errors:0 dropped:27 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:19790 (19.3 KiB) TX bytes:16796 (16.4 KiB)
I have run the following commands for each of the tap devices :
iptables -t nat -I POSTROUTING -o tap3 -j MASQUERADE
iptables -I FORWARD -o tap2 -j ACCEPT
iptables -I FORWARD -i tap2 -j ACCEPT
I start my UML instances with the following commands:
./kernel64-2.6.33.2_64 ubda=CentOS5-AMD64-root_fs_64_2
eth0=tuntap,tap3,fe:f0:00:00:00:03,192.168.1.3 con0=fd:0,fd:1 mem=256M
./kernel64-2.6.33.2_64 ubda=CentOS5-AMD64-root_fs_64_1
eth0=tuntap,tap2,fe:f0:00:00:00:03,192.168.0.2 con0=fd:0,fd:1 mem=256M
Can someone give me some pointers on how to setup 2 or more UML instances on
the same host ?
Thanks,
-Leo
------------------------------------------------------------------------------
_______________________________________________
User-mode-linux-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user
