I stopped all of the services, removed localhost and even reinitialized
the node. When I brought it back up, that Groovy script hangs at the
line right after it says it's attempting to get a connection. Even
Ubuntu's firewall is turned off.
On Fri, Dec 4, 2015 at 10:50 AM, Adam Fuchs <afu...@apache.org
<mailto:afu...@apache.org>> wrote:
Mike,
I suspect if you get rid of the "localhost" line and restart
Accumulo then you will get services listening on the non-loopback
IPs. Right now you have some of your processes accessible outside
your VM and others only accessible from inside, and you probably
have two tablet servers when you should only have one.
Cheers,
Adam
On Fri, Dec 4, 2015 at 9:50 AM, Mike Thomsen <mikerthom...@gmail.com
<mailto:mikerthom...@gmail.com>> wrote:
I tried adding some read/write examples and ran into a problem.
It would hang at the first scan or write operation I tried. I
checked the master port (9999) and it was only listening on
127.0.0.1:9999 <http://127.0.0.1:9999>. netstat had two entries
for 9997. This is what conf/masters has for my VM:
# limitations under the License.
localhost
vagrant-ubuntu-vivid-64
It's the same with all of the other files (slaves, gc, etc.)
Any ideas?
Thanks,
Mike
On Thu, Dec 3, 2015 at 3:54 PM, Mike Thomsen
<mikerthom...@gmail.com <mailto:mikerthom...@gmail.com>> wrote:
Thanks! That was all that I needed to do.
On Thu, Dec 3, 2015 at 3:33 PM, Josh Elser
<josh.el...@gmail.com <mailto:josh.el...@gmail.com>> wrote:
Could be that the Accumulo services are only listening
on localhost and not the "external" interface for your
VM. To get a connector, that's a call to a TabletServer
which run on 9997 by default (and you have open).
Do a `netstat -nape | fgrep 9997 | fgrep LISTEN` in your
VM and see what interface the server is bound to. I'd
venture a guess that you just need to put the FQDN for
your VM in $ACCUMULO_CONF_DIR/slaves (and masters,
monitor, gc, tracers, for completeness) instead of
localhost.
Mike Thomsen wrote:
I have Accumulo running in a VM. This Groovy script
will connect just
fine from within the VM, but outside of the VM it
hangs at the first
println statement.
String instance = "test"
String zkServers = "localhost:2181"
String principal = "root";
AuthenticationToken authToken = new
PasswordToken("testing1234");
ZooKeeperInstance inst = new
ZooKeeperInstance(instance, zkServers);
println "Attempting connection"
Connector conn = inst.getConnector(principal,
authToken);
println "Connected!"
This is the listing of ports I have opened up in
Vagrant:
config.vm.network "forwarded_port", guest: 2122,
host: 2122
config.vm.network "forwarded_port", guest: 2181,
host: 2181
config.vm.network "forwarded_port", guest: 2888,
host: 2888
config.vm.network "forwarded_port", guest: 3888,
host: 3888
config.vm.network "forwarded_port", guest: 4445,
host: 4445
config.vm.network "forwarded_port", guest: 4560,
host: 4560
config.vm.network "forwarded_port", guest: 6379,
host: 6379
config.vm.network "forwarded_port", guest: 8020,
host: 8020
config.vm.network "forwarded_port", guest: 8030,
host: 8030
config.vm.network "forwarded_port", guest: 8031,
host: 8031
config.vm.network "forwarded_port", guest: 8032,
host: 8032
config.vm.network "forwarded_port", guest: 8033,
host: 8033
config.vm.network "forwarded_port", guest: 8040,
host: 8040
config.vm.network "forwarded_port", guest: 8042,
host: 8042
config.vm.network "forwarded_port", guest: 8081,
host: 8081
config.vm.network "forwarded_port", guest: 8082,
host: 8082
config.vm.network "forwarded_port", guest: 8088,
host: 8088
config.vm.network "forwarded_port", guest: 9000,
host: 9000
config.vm.network "forwarded_port", guest: 9092,
host: 9092
config.vm.network "forwarded_port", guest: 9200,
host: 9200
config.vm.network "forwarded_port", guest: 9300,
host: 9300
config.vm.network "forwarded_port", guest: 9997,
host: 9997
config.vm.network "forwarded_port", guest: 9999,
host: 9999
#config.vm.network "forwarded_port", guest:
10001, host: 10001
config.vm.network "forwarded_port", guest:
10002, host: 10002
config.vm.network "forwarded_port", guest:
11224, host: 11224
config.vm.network "forwarded_port", guest:
12234, host: 12234
config.vm.network "forwarded_port", guest:
19888, host: 19888
config.vm.network "forwarded_port", guest:
42424, host: 42424
config.vm.network "forwarded_port", guest:
49707, host: 49707
config.vm.network "forwarded_port", guest:
50010, host: 50010
config.vm.network "forwarded_port", guest:
50020, host: 50020
config.vm.network "forwarded_port", guest:
50070, host: 50070
config.vm.network "forwarded_port", guest:
50075, host: 50075
config.vm.network "forwarded_port", guest:
50090, host: 50090
config.vm.network "forwarded_port", guest:
50091, host: 50091
config.vm.network "forwarded_port", guest:
50095, host: 50095
Any ideas why it is not letting my connect? It just
hangs and never even
seems to time out.
Thanks,
Mike
