Thanks Even if I set jute.maxbuffer on zookeeper in conf/java.env file to
-Djute.maxbuffer=300000 I see in accumulo master log as INFO: jute.maxbuffer value is 1048575 Bytes not sure where to set that on accumulo side. I set instance.zookeeper.timeout value to 90s in accumulo-site.xml But still get those zookeeper KeeperErrorCode errors -S From: dev1 <d...@etcoleman.com> Sent: Wednesday, February 9, 2022 4:27 PM To: user@accumulo.apache.org Subject: [EXTERNAL EMAIL] - Re: accumulo 1.10.0 masters won't start I would not recommend setting the goal state directly unlit there are no other alternatives. It is hard to recommend what to do, because it is unclear what put you into the current situation and what action / impact you might have had trying to fix things - why did the goal state become unset in the first place? what did you stuff into the fates that increased the need for larger jute buffers? It could be that the number of tables and servers pushed you over the limit - or it could be something else. What I would do. Shutdown accumulo and make sure all services / tservers are stopped. Shutdown any other services that might be using ZooKeeper. Shutdown ZooKeeper. Set the larger jute.buffer and increase the timeout values across the board and in any dependent services. Start hdfs - if you needed to shut it down. Start just zookeeper - and use zkCli.sh to examine the state of things. If that looks okay. Start just the master - how far does it come up? It will not be able to load the root / metadata tables, but it may give some indication of state, I'd then cycle between stopping the master, trying to clean-up things using zkCli.sh using any guidance with errors the master is generating. If that looks promising, then: With the master stopped - start the tservers and check a few logs if there are exceptions determine if they are they something that is pointing to an issue - or just something that is transient and handled. Once the tservers are up and looking okay - start the master. One of the things to grab as soon as you can get the shell to run - get a listing of the tables and the ids. If the worst happens, you can use that to map the existing data into a "new" instance. Hopefully it will not come to that and you will not need it - but if you don't have it and you need it, well... The table names and id are all in ZooKeeper. Ed Coleman ________________________________ From: Shailesh Ligade <slig...@fbi.gov<mailto:slig...@fbi.gov>> Sent: Wednesday, February 9, 2022 3:47 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: RE: accumulo 1.10.0 masters won't start Thanks I can try that, At this point, my goal is to get accumulo up. I was just wondering if I can set different goal like SAFE_MODE will it come up by ignoring fate and other issues? If that comes up, can I switch back to NORMAL, will that work? I understand there may be some data loss.. -S From: dev1 <d...@etcoleman.com<mailto:d...@etcoleman.com>> Sent: Wednesday, February 9, 2022 3:36 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> Subject: [EXTERNAL EMAIL] - Re: accumulo 1.10.0 masters won't start For values in zoo.cfg see: https://zookeeper.apache.org/doc/r3.5.9/zookeeperAdmin.html#sc_advancedConfiguration<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fzookeeper.apache.org%2Fdoc%2Fr3.5.9%2FzookeeperAdmin.html%23sc_advancedConfiguration&data=04%7C01%7CSLIGADE%40FBI.GOV%7Cb7b8be92faf64fbc95ff08d9ec13044d%7C022914a9b95f4b7bbace551ce1a04071%7C0%7C0%7C637800390698440068%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QaGFX7kcHJeiIN73G5bfDDEQNgxN0F7QdyJ9fO3SJzA%3D&reserved=0> maxSessionTimeout In the accumulo config - #instance.zookeepers.timeout=30s The zookeeper setting controls the max time that the ZK servers will grant - the accumulo setting is how much time accumulo will ask for. ZooKeeper: Because Coordinating Distributed Systems is a Zoo<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Fzookeeper.apache.org%2Fdoc%2Fr3.5.9%2FzookeeperAdmin.html%23sc_advancedConfiguration&data=04%7C01%7CSLIGADE%40FBI.GOV%7Cb7b8be92faf64fbc95ff08d9ec13044d%7C022914a9b95f4b7bbace551ce1a04071%7C0%7C0%7C637800390698440068%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=QaGFX7kcHJeiIN73G5bfDDEQNgxN0F7QdyJ9fO3SJzA%3D&reserved=0> Trace Mask Bit Values ; 0b0000000000 : Unused, reserved for future use. 0b0000000010 : Logs client requests, excluding ping requests. 0b0000000100 : Unused, reserved ... zookeeper.apache.org ________________________________ From: Ligade, Shailesh [USA] <ligade_shail...@bah.com<mailto:ligade_shail...@bah.com>> Sent: Wednesday, February 9, 2022 3:03 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: Re: accumulo 1.10.0 masters won't start thanks for response, no i have not update any timeout is that going in zoo.cfg? I can see there is min/maxSessionTimeout 2/20, is that what are you refering to? -S ________________________________ From: dev1 <d...@etcoleman.com<mailto:d...@etcoleman.com>> Sent: Wednesday, February 9, 2022 2:51 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: [External] Re: accumulo 1.10.0 masters won't start Have you tried to increase the zoo session timeout value? I think it's zookeeper.session.timeout.ms ________________________________ From: Ligade, Shailesh [USA] <ligade_shail...@bah.com<mailto:ligade_shail...@bah.com>> Sent: Wednesday, February 9, 2022 2:47 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: Re: accumulo 1.10.0 masters won't start Thanks That fixed goal sate issue but now still getting Errors with zookeeper e.g. KeeperErrorCode = ConnectionLoss for /accumulo/<instane-id>/config/tserver.hold.time.max /accumulo/<instane-id>/tables /accumulo/<instane-id>/tables/1/name /accumulo/<instane-id>/fate /accumulo/<instane-id>/masters/goal_state So it is all over …some I see good values in zookeeper…so not sure.. 🙁 -S ________________________________ From: dev1 <d...@etcoleman.com<mailto:d...@etcoleman.com>> Sent: Wednesday, February 9, 2022 2:22 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: [External] Re: accumulo 1.10.0 masters won't start The is a utility - SetGoalState that can be run from the command line accumulo SetGoalState NORMAL (or SAFE_MODE, CLEAN_STOP) It sets a value in ZK at /accumulo/instance-id/managers/goal_state Ed Coleman ________________________________ From: Ligade, Shailesh [USA] <ligade_shail...@bah.com<mailto:ligade_shail...@bah.com>> Sent: Wednesday, February 9, 2022 1:54 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: Re: accumulo 1.10.0 masters won't start Well, i just went ahead and deleted fate in zookeeper and restarted the master..it was doing better but then i am getting different error ERROR: Problem getting real goal state from zookeeper: java.lang.IllegalArgumentException: No enum constant org.apache.accumulo.core.master.thrift.MasterGoalState I hope i didn't delete goal_state accidently ...;-( currently ls on goal_state is [], is there a way to add some value there? -S ________________________________ From: dev1 <d...@etcoleman.com<mailto:d...@etcoleman.com>> Sent: Wednesday, February 9, 2022 1:32 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: [External] Re: accumulo 1.10.0 masters won't start Did you try setting the increased size in the zkCli.sh command (or wherever it gets it environment from?) The ZK docs indicate that it needs to be set to the same size on all servers and clients. You should be able to use zkCli.sh to at least see what's going on - if that does not work, then it seems unlikely that the master would either. Can you: * list the nodes under /accumulo/[instance id]/fate? * use the stat command on each of the nodes - the size is one of the fields. * list nodes under any of the /accumulo/[instance_id/fate/tx-##### * there should be a node named debug - doing a get on that should show the op name. Ed Coleman ________________________________ From: Ligade, Shailesh [USA] <ligade_shail...@bah.com<mailto:ligade_shail...@bah.com>> Sent: Wednesday, February 9, 2022 12:54 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: Re: accumulo 1.10.0 masters won't start Thanks I added -Djute.maxbuffer=30000000 In conf/java.env and restart all zookeepers but still getting the same error.. documentation is kind of fuzzy on setting this property as it states in hex (default 0xffff) so not 100% sure if 30000000 is ok, but atleast I could see zookeeper was up -S ________________________________ From: dev1 <d...@etcoleman.com<mailto:d...@etcoleman.com>> Sent: Wednesday, February 9, 2022 12:26 PM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: [External] Re: accumulo 1.10.0 masters won't start Does the monitor or any of the logs show errors that relate to exceeding the ZooKeeper jute buffer size? Is so, have you tried increasing the ZooKeeper jute.maxbuffer limit(https://zookeeper.apache.org/doc/r3.5.9/zookeeperAdmin.html#Unsafe+Options<https://usg02.safelinks.protection.office365.us/?url=https%3A%2F%2Furldefense.com%2Fv3%2F__https%3A%2F%2Fzookeeper.apache.org%2Fdoc%2Fr3.5.9%2FzookeeperAdmin.html*Unsafe*Options__%3BIys!!May37g!dTGCMHPLPDBXwSqtLa5cIPHiTIQF7IjLCVyvGxfi1sgPbrsOI8RCEsuZ9u-jJtayEg%24&data=04%7C01%7CSLIGADE%40FBI.GOV%7Cb7b8be92faf64fbc95ff08d9ec13044d%7C022914a9b95f4b7bbace551ce1a04071%7C0%7C0%7C637800390698440068%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=meZvmEpBktGc95qzM46QmtNWp5NJ8noozSTv896k7qw%3D&reserved=0>)? Ed Coleman ________________________________ From: Ligade, Shailesh [USA] <ligade_shail...@bah.com<mailto:ligade_shail...@bah.com>> Sent: Wednesday, February 9, 2022 11:49 AM To: user@accumulo.apache.org<mailto:user@accumulo.apache.org> <user@accumulo.apache.org<mailto:user@accumulo.apache.org>> Subject: accumulo 1.10.0 masters won't start Hello, My both masters are stuck error on zookeeper: IOException: Packet len 2791093 is out of range! KeeperErrorCode = ConnectionLoss for /accumulo/<instance_id>/fate if use zkCli to see what is under fate, i get IOException Packet len 2791161 is out of range Unable to read additional data from server sessionid xxxx, likely server has closed socket hdfs fsck is all good How can I clear this fate? master process is up and I can get into accumulo shell, but there are no fate (fate print returns empty) Any idea how to bring the master up? Thanks S
