Hi Jared.
Thanks for your help.
I made the config-changes.
Also, I changed the seed (right now, we are just trying to get one
instance up and running) ::
################################################################
seed_provider:
# Addresses of hosts that are deemed contact points.
# Cassandra nodes use this list of hosts to find each other and learn
# the topology of the ring. You must change this if you are running
# multiple nodes!
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
parameters:
# seeds is actually a comma-delimited list of addresses.
# Ex: "<ip1>,<ip2>,<ip3>"
- seeds: "our.ip.address.here"
################################################################
Following is the netstat output ::
################################################################
ajay@comp:~$ sudo netstat -apn | grep 9042
tcp6 0 0 0.0.0.0:9042 :::*
LISTEN 22469/java
################################################################
Still, when I try, we get ::
################################################################
ajay@comp:~$ cqlsh our.ip.address.here
Connection error: ('Unable to connect to any servers',
{'our.ip.address.here': error(None, "Tried connecting to
[('our.ip.address.here', 9042)]. Last error: None")})
################################################################
:( :(
On Mon, Sep 14, 2015 at 11:00 PM, Jared Biel
<[email protected]> wrote:
> Is there a reason that you're setting listen_address and rpc_address to
> localhost?
>
> listen_address doc: "the Right Thing is to use the address associated with
> the hostname". So, set the IP address of this to eth0 for example. I believe
> if it is set to localhost then you won't be able to form a cluster with
> other nodes.
>
> rpc_address: this is the address to which clients will connect. I recommend
> 0.0.0.0 here so clients can connect to IP address of the server as well as
> localhost if they happen to reside on the same instance.
>
>
> Here are all of the address settings from our config file. 192.168.1.10 is
> the IP address of eth0 and broadcast_address is commented out.
>
> listen_address: 192.168.1.10
> # broadcast_address: 1.2.3.4
> rpc_address: 0.0.0.0
> broadcast_rpc_address: 192.168.1.10
>
> Follow these directions to get up and running with the first node
> (destructive process):
>
> 1. Stop cassandra
> 2. Remove data from cassandra var directory (rm -rf /var/lib/cassandra/*)
> 3. Make above changes to config file. Also set seeds to the eth0 IP address
> 4. Start cassandra
> 5. Set seeds in config file back to "" after cassandra is up and running.
>
> After following that process, you'll be able to connect to the node from any
> host that can reach Cassandra's ports on that node ("cqlsh" command will
> work.) To join more nodes to the cluster, follow the steps same steps as
> above, except the seeds value to the IP address of an already running node.
>
> Regarding the empty "seeds" config entry: our configs are automated with
> configuration management. During the node bootstrap process a script
> performs the above. The reason that we set seeds back to empty is that we
> don't want nodes coming up/down to cause the config file to change and thus
> cassandra to restart needlessly. So far we haven't had any issues with seeds
> being set to empty after a node has joined the cluster, but this may not be
> the recommended way of doing things.
>
> -Jared
>
> On 14 September 2015 at 16:46, Ajay Garg <[email protected]> wrote:
>>
>> Hi All.
>>
>> Thanks for your replies.
>>
>> a)
>> cqlsh <IP-Address of server> does not work either :(
>>
>>
>> b)
>> Following are the parameters as asked ::
>>
>> listen_address: localhost
>> rpc_address: localhost
>>
>> broadcast_rpc_address is not set.
>> According to the yaml file ::
>>
>> # RPC address to broadcast to drivers and other Cassandra nodes. This
>> cannot
>> # be set to 0.0.0.0. If left blank, this will be set to the value of
>> # rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address
>> must
>> # be set.
>> # broadcast_rpc_address: 1.2.3.4
>>
>>
>> c)
>> Following is the netstat-output, with process information ::
>>
>>
>> #######################################################################################################
>> ajay@comp:~$ sudo netstat -apn | grep 9042
>> [sudo] password for admin:
>> tcp6 0 0 127.0.0.1:9042 :::*
>> LISTEN 10169/java
>>
>> #######################################################################################################
>>
>>
>> Kindly let me know what else we can try .. it is really driving us nuttsss
>> :(
>>
>> On Mon, Sep 14, 2015 at 9:40 PM, Jared Biel
>> <[email protected]> wrote:
>> > Whoops, I accidentally pressed a hotkey and sent my message prematurely.
>> > Here's what netstat should look like with those settings:
>> >
>> > sudo netstat -apn | grep 9042
>> > tcp6 0 0 0.0.0.0:9042 :::*
>> > LISTEN
>> > 21248/java
>> >
>> > -Jared
>> >
>> > On 14 September 2015 at 16:09, Jared Biel
>> > <[email protected]>
>> > wrote:
>> >>
>> >> I assume "@ Of node" is ethX's IP address? Has cassandra been restarted
>> >> since changes were made to cassandra.yaml? The netstat output that you
>> >> posted doesn't look right; we use settings similar to what you've
>> >> posted.
>> >> Here's what it looks like on one of our nodes.
>> >>
>> >>
>> >> -Jared
>> >>
>> >> On 14 September 2015 at 10:34, Ahmed Eljami <[email protected]>
>> >> wrote:
>> >>>
>> >>> In cassanrda.yaml:
>> >>> listen_address:@ Of node
>> >>> rpc_address:0.0.0.0
>> >>>
>> >>> brodcast_rpc_address:@ Of node
>> >>>
>> >>> 2015-09-14 11:31 GMT+01:00 Neha Dave <[email protected]>:
>> >>>>
>> >>>> Try
>> >>>> >cqlsh <IP Address of you Server>
>> >>>>
>> >>>> regards
>> >>>> Neha
>> >>>>
>> >>>> On Mon, Sep 14, 2015 at 3:53 PM, Ajay Garg <[email protected]>
>> >>>> wrote:
>> >>>>>
>> >>>>> Hi All.
>> >>>>>
>> >>>>> We have setup a Ubuntu-14.04 server, and followed the steps exactly
>> >>>>> as
>> >>>>> per http://wiki.apache.org/cassandra/DebianPackaging
>> >>>>>
>> >>>>> Installation completes fine, Cassandra starts fine, however cqlsh
>> >>>>> does
>> >>>>> not work.
>> >>>>> We get the error ::
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>> ajay@comp:~$ cqlsh
>> >>>>> Connection error: ('Unable to connect to any servers', {'127.0.0.1':
>> >>>>> error(None, "Tried connecting to [('127.0.0.1', 9042)]. Last error:
>> >>>>> None")})
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> Version-Info ::
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>> ajay@comp:~$ dpkg -l | grep cassandra
>> >>>>> ii cassandra 2.1.9
>> >>>>> all distributed storage system for structured data
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> The port "seems" to be opened fine.
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>> ajay@comp:~$ netstat -an | grep 9042
>> >>>>> tcp6 0 0 127.0.0.1:9042 :::*
>> >>>>> LISTEN
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> Firewall-filters ::
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>> ajay@comp:~$ sudo iptables -L
>> >>>>> [sudo] password for ajay:
>> >>>>> Chain INPUT (policy ACCEPT)
>> >>>>> target prot opt source destination
>> >>>>> ACCEPT all -- anywhere anywhere state
>> >>>>> RELATED,ESTABLISHED
>> >>>>> ACCEPT tcp -- anywhere anywhere tcp
>> >>>>> dpt:ssh
>> >>>>> DROP all -- anywhere anywhere
>> >>>>>
>> >>>>> Chain FORWARD (policy ACCEPT)
>> >>>>> target prot opt source destination
>> >>>>>
>> >>>>> Chain OUTPUT (policy ACCEPT)
>> >>>>> target prot opt source destination
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> Even telnet fails :(
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>> ajay@comp:~$ telnet localhost 9042
>> >>>>> Trying 127.0.0.1...
>> >>>>>
>> >>>>>
>> >>>>> #######################################################################################################
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> Any ideas please?? We have been stuck on this for a good 3 hours now
>> >>>>> :(
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> Thanks and Regards,
>> >>>>> Ajay
>> >>>>
>> >>>>
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Cordialement;
>> >>>
>> >>> Ahmed ELJAMI
>> >>
>> >>
>> >
>>
>>
>>
>> --
>> Regards,
>> Ajay
>
>
--
Regards,
Ajay
