Hi Paul,
do you have GEOS [1] installed?
In case you start CouchDB with ./utils/run, you can run it with "-i".
Now you have an interactive shell. Try there something like:
erlgeom:to_geom({'Point',[5,5]}).
Now you should get an error, if the NIF can't be loaded (which could be
the case if you don't have GEOS installed properly).
[1] http://trac.osgeo.org/geos/
Cheers,
Volker
On 07/15/2012 12:21 AM, Paul Torres wrote:
> Volker,
> I finally traced all my mistakes. Couch 1.2.0 works fine now and
> passes all Couch 1.2.0 specific tests. I had to upgrade my version of
> Firefox in the process amongst other things. I had also forgotten to
> update an environment flag.
>
> In any event, all but one test for geocouch (with polygons)
> passes. The final test spatial_opensearch fails with:
> Assertion 'Intersects 3 geometries.' failed: expected '3', got '0'
> Assertion 'searching with polygon' failed: expected '["0","1","2"]', got '[]'
> Assertion 'Intersects one LineString twice.' failed: expected '1', got '0'
> Assertion 'Intersects one geometry.' failed: expected '1', got '0'
> Assertion 'Intersects two geometries.' failed: expected '2', got '0'
>
> Any clue what that might be?
>
> -Paul
>
> On Thu, Jul 12, 2012 at 2:32 AM, Paul Torres <[email protected]> wrote:
>> Thank you Volker. I am interested in getting this to work.
>>
>> I'll have to get back to you still later. I thought I was having
>> problems with geocouch (with support for polygons) in combination with
>> couchdb 1.2.0 but it turns out I'm having problems with couchdb 1.2.0
>> itself. Maybe I can get advice on this new issue from someone?
>>
>> 1.2.0 builds fine, make check passes all tests, the configure script
>> is happy, and
>> I removed the first installation (I used make uninstall to do some of
>> that as well).
>> I manually removed the old geocouch.ini file. After the new install I
>> changed the
>> ownership and groups to my couchdb user and group, etc. And I am not
>> forgetting to
>> use Firefox.
>>
>> But some of the futon tests are failing...and then many of them fail.
>> To be precise, the attachments test fails right away with:
>> Assertion failed: xhr.responseText == lorem
>> Exception raised: {}
>>
>> list_views fails right away with:
>> Assertion 'xhr.status == 200, "standard get should be 200"' failed:
>> standard get should be 200
>> Assertion failed: /head0123456789tail/.test(xhr.responseText)
>>
>> rev_stemming fails right away with:
>> Assertion failed: db.open("bar", {revs: true})._revisions.ids.length
>> == newLimit + 1
>> Assertion failed: db.open("bar", {revs: true})._revisions.ids.length
>> == newLimit + 1
>>
>> view_compaction fails [but succeeds on a 2nd manual try] with:
>> Assertion failed: resp.view_index.disk_size < disk_size_before_compact
>>
>>
>> Then if I run all the tests again, a whole lot more of them fail. In
>> particular
>> all tests after users_db_security fail with the error:
>> Exception raised: {"error":"unauthorized","reason":"You are not a
>> server admin."}
>> The test users_db_security itself fails with: Exception raised: {}
>>
>>
>> And following any links--or clicking on reload--causes the "admin party" to
>> suddenly end and I'm no longer admin nor can I run any more tests. The
>> "Verify
>> your installation" works the first time (before all these failed tests) but
>> after the failures, it returns X: [object Object]
>>
>> I'm not sure what to do. I have a nagging feeling something from the
>> 1.1.0 install
>> lingers and screws up the 1.2.0 install, but I cannot find it. And if it is
>> not
>> that I don't have a clue right now what is causing this error. I've never had
>> this much trouble building from source before and it's eaten up so much time.
>>
>> -Paul
>>
>> On Wed, Jul 11, 2012 at 11:19 AM, Volker Mische <[email protected]>
>> wrote:
>>> Hi Paul
>>>
>>> On 07/11/2012 03:44 AM, Paul Torres wrote:
>>>> Does anyone have any experience with the latest experimental geocouch
>>>> that supports
>>>> polygons? From: https://github.com/vmx/geocouch/tree/couchdbgeom
>>>
>>> Yes ;)
>>>
>>>> Being experimental, does that mean the tests in the futon test suite do not
>>>> neccessarily all pass? I have a few that are failing, but I cannot track
>>>> down
>>>> any (more) of my own errors that might be causing it. I have all the
>>>> dependencies
>>>> including GEOS available in my PATH, and my ERL_FLAGS are set, etc. I
>>>> compiled and copied the .ini file and the tests and updated the list
>>>> of tests that
>>>> should be run... I'm running couch 1.1.0 compiled from source.
>>>
>>> All Futon tests should work. The problem might be that this version is
>>> for CouchDB 1.2.0 and was only tested with it.
>>>
>>>> Poking around the makefile for the geocouch I noticed it included targets
>>>> for
>>>> running tests and these do not all pass either, so it would seem to me that
>>>> something might be wrong at the compilation stage. If true then I guess the
>>>> code just needs more work. But is that the case? I'm not very fluent in
>>>> Erlang
>>>> yet to read it all and determine definitely for myself and I'd like to
>>>> double check
>>>> with anyone who knows for certain.
>>>
>>> Try again with CouchDB 1.2.0 and let me know if it still doesn't pass
>>> all tests.
>>>
>>> Cheers,
>>> Volker
>>>
