Ah, now I see where the problem lies. You're reusing the Iterator
which you have already used in the for loop. You can only iterate over
the elements once! This is the nature of the Java Iterator and
DataStreamUtils.collect(..) returns an iterator.
On Wed, Jul 20, 2016 at 1:11 PM, subash basnet <yasub...@gmail.com> wrote:
>
> Hello Maximilian,
>
> Thank's for the update. Yup it works in the example you gave. I checked with
> collection also it works. But not in my datastream case after the collection.
> DataStream<Centroid> centroids = newCentroidDataStream.map(new
> TupleCentroidConverter());
> Iterator<Centroid> iter = DataStreamUtils.collect(centroids);
> while (iter.hasNext()) {
> System.out.println(iter.next());
> }
> Collection<Centroid> testCentroids = Lists.newArrayList(iter);
> for (Centroid c : testCentroids) {
> System.out.println(c);
> }
>
> In the above code the while loop prints the result as below, but the next for
> loop after the collection gives blank.
>
> Tue Jul 19 15:49:00 CEST 2016 118.7 118.81 118.7 118.77 76300.0
> Tue Jul 19 15:47:02 CEST 2016 118.85 118.885 118.8 118.84 75600.0
> Tue Jul 19 15:46:00 CEST 2016 118.8627 118.93 118.79 118.8 76300.0
> Tue Jul 19 15:45:59 CEST 2016 118.8 118.94 118.77 118.9 106800.0
>
> Not sure, what is the problem, as after collection it gives blank result in
> my case but works in the example you gave. Below is my newCentroidDataStream:
>
> @SuppressWarnings("serial")
> DataStream<Tuple2<String, Double[]>> newCentroidDataStream =
> keyedEdits.timeWindow(Time.seconds(1))
> .fold(new Tuple2<>("", columns1), new FoldFunction<Stock, Tuple2<String,
> Double[]>>() {
> @Override
> public Tuple2<String, Double[]> fold(Tuple2<String, Double[]> st, Stock
> value) {
> Double[] columns = new Double[5];// close,high,low,open,volume
> columns[0] = value.getClose();
> columns[1] = value.getHigh();
> columns[2] = value.getLow();
> columns[3] = value.getOpen();
> columns[4] = (double) value.getVolume();
> return (new Tuple2<String, Double[]>(value.getId(), columns));
> }
> });
>
> Regards,
> Subash Basnet
>
> On Wed, Jul 20, 2016 at 12:20 PM, Maximilian Michels <m...@apache.org> wrote:
>>
>> This message is eligible for Automatic Cleanup! (m...@apache.org) Add
>> cleanup rule | More info
>>
>> Just tried the following and it worked:
>>
>> public static void main(String[] args) throws IOException {
>> StreamExecutionEnvironment env =
>> StreamExecutionEnvironment.getExecutionEnvironment();
>>
>> final DataStreamSource<Integer> source = env.fromElements(1, 2, 3, 4);
>> source.print();
>>
>> final Iterator<Integer> iter = DataStreamUtils.collect(source);
>> while (iter.hasNext()) {
>> System.out.println(iter.next());
>> }
>> }
>>
>> It prints:
>>
>> 1
>> 2
>> 3
>> 4
>> 2> 2
>> 1> 1
>> 4> 4
>> 3> 3
>>
>> However, the collect util needs some improvements. It assumes that the
>> machine running the code is reachable on a random port by the Flink cluster.
>> If you have any firewalls, then this might not work.
>>
>> Cheers,
>> Max
>>
>> On Tue, Jul 19, 2016 at 10:13 PM, subash basnet <yasub...@gmail.com> wrote:
>>>
>>> Hello Till,
>>>
>>> Yup I can see the log output in my console, but there is no information
>>> there regarding if there is any error in conversion. Just normal warn and
>>> info as below:
>>> 22:09:16,676 WARN org.apache.flink.streaming.runtime.tasks.StreamTask
>>> - No state backend has been specified, using default state backend
>>> (Memory / JobManager)
>>> 22:09:16,676 INFO org.apache.flink.streaming.runtime.tasks.StreamTask
>>> - State backend is set to heap memory (checkpoint to jobmanager)
>>>
>>> The above message is always there when I run my project. It would be great
>>> if someone could check why the collection of datastream via DataStreamUtils
>>> is giving empty result.
>>>
>>> Best Regards,
>>> Subash Basnet
>>>
>>> On Tue, Jul 19, 2016 at 4:52 PM, Till Rohrmann <trohrm...@apache.org> wrote:
>>>>
>>>> It depends if you have a log4j.properties file specified in your
>>>> classpath. If you see log output on the console, then it should also print
>>>> errors there.
>>>>
>>>> Cheers,
>>>> Till
>>>>
>>>> On Tue, Jul 19, 2016 at 3:08 PM, subash basnet <yasub...@gmail.com> wrote:
>>>>>
>>>>> Hello Till,
>>>>>
>>>>> Shouldn't it write something in the eclipse console if there is any error
>>>>> or warning. But nothing about error is printed on the console. And I
>>>>> checked the flink project folder: flink-core, flink streaming as such but
>>>>> couldn't find where the log is written when run via eclipse.
>>>>>
>>>>> Best Regards,
>>>>> Subash Basnet
>>>>>
>>>>> On Tue, Jul 19, 2016 at 2:49 PM, Till Rohrmann <trohrm...@apache.org>
>>>>> wrote:
>>>>>>
>>>>>> Have you checked your logs whether they contain some problems? In
>>>>>> general it is not recommended collecting the streaming result back to
>>>>>> your client. It might also be a problem with `DataStreamUtils.collect`.
>>>>>>
>>>>>> Cheers,
>>>>>> Till
>>>>>>
>>>>>> On Tue, Jul 19, 2016 at 2:42 PM, subash basnet <yasub...@gmail.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> Hello all,
>>>>>>>
>>>>>>> I tried to check if it works for tuple but same problem, the collection
>>>>>>> still shows blank result. I took the id of centroid tuple and printed
>>>>>>> it, but the collection displays empty.
>>>>>>>
>>>>>>> DataStream<Centroid> centroids = newCentroidDataStream.map(new
>>>>>>> TupleCentroidConverter());
>>>>>>> DataStream<Tuple1<String>> centroidId = centroids.map(new TestMethod());
>>>>>>> centroidId.print();
>>>>>>> Iterator<Tuple1<String>> iter = DataStreamUtils.collect(centroidId);
>>>>>>> Collection<Tuple1<String>> testCentroids = Lists.newArrayList(iter);
>>>>>>> for (Tuple1<String> c : testCentroids) {
>>>>>>> System.out.println(c);
>>>>>>> }
>>>>>>> Output: (Mon Jul 18 17:36:03 CEST 2016) (Mon Jul 18 17:43:58 CEST 2016)
>>>>>>> (Mon Jul 18 17:42:59 CEST 2016) (Mon Jul 18 17:34:01 CEST 2016) (Mon
>>>>>>> Jul 18 17:52:00 CEST 2016) (Mon Jul 18 17:40:58 CEST 2016) for
>>>>>>> centroidId.print(), but no output for System.out.println(c); Best
>>>>>>> Regards, Subash Basnet
>>>>>>>
>>>>>>> On Tue, Jul 19, 2016 at 10:48 AM, subash basnet <yasub...@gmail.com>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Hello all,
>>>>>>>>
>>>>>>>> I am trying to convert datastream to collection, but it's shows blank
>>>>>>>> result. There is a stream of data which can be viewed on the console
>>>>>>>> on print(), but the collection of the same stream shows empty after
>>>>>>>> conversion. Below is the code:
>>>>>>>>
>>>>>>>> DataStream<Centroid> centroids = newCentroidDataStream.map(new
>>>>>>>> TupleCentroidConverter());
>>>>>>>> centroids.print();
>>>>>>>> Iterator<Centroid> iter = DataStreamUtils.collect(centroids);
>>>>>>>> Collection<Centroid> testCentroids = Lists.newArrayList(iter);
>>>>>>>> for(Centroid c: testCentroids){
>>>>>>>> System.out.println(c);
>>>>>>>> }
>>>>>>>>
>>>>>>>> The above centroids.print() gives the following output in console:
>>>>>>>>
>>>>>>>> Mon Jul 18 21:29:01 CEST 2016 119.3701 119.4 119.3701 119.38 27400.0
>>>>>>>> Mon Jul 18 21:23:00 CEST 2016 119.3463 119.37 119.315 119.37 48200.0
>>>>>>>> Mon Jul 18 21:27:59 CEST 2016 119.3401 119.3401 119.26 119.265 50300.0
>>>>>>>> Mon Jul 18 21:36:00 CEST 2016 119.48 119.505 119.47 119.4741 37400.0
>>>>>>>> Mon Jul 18 21:33:00 CEST 2016 119.535 119.54 119.445 119.455 152900.0
>>>>>>>>
>>>>>>>> But the next System.out.println(c) within the for loop prints nothing.
>>>>>>>> What could be the problem.
>>>>>>>>
>>>>>>>> My maven has following configuration for dataStreamUtils:
>>>>>>>> <dependency>
>>>>>>>> <groupId>org.apache.flink</groupId>
>>>>>>>> <artifactId>flink-streaming-contrib_2.10</artifactId>
>>>>>>>> <version>${flink.version}</version>
>>>>>>>> </dependency>
>>>>>>>>
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Subash Basnet
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>>
>
