Hi
Thanks for the inputs Brock. After doing several experiments
eventually problem boiled down to disks.
-- But I had used the same configuration (so all software components
are same in all 3 machines)
on all 3 machines.
-- In User guide it is written that if multiple file channel instances
are active on the same agent then
different disks are preferable. But in my case *only one file channel is
active per agent.*
-- Only one pattern I observed that on the machines where I got better
performance have multiple disks.
But I don't understand how that will help if I have only 1 active file
channel.
-- What is the impact of the type of disk/disk device driver on
performance? I mean I don't understand
with 1 disk I am getting 40 KB/sec and with other 2 MB/sec.
Could you please elaborate on File channel and disks correlation.
Regards,
Jagadish
On 10/09/2012 08:01 PM, Brock Noland wrote:
Hi,
Using file channel, in terms of performance, the number and type of
disks is going to be much more predictive of performance than CPU or
RAM. Note that consumer level drives/controllers will give you much
"better" performance because they lie to you about when your data is
actually written to the drive. If you search for "fsync lies" you'll
find more information on this.
You probably want to increase the batch size to get better performance.
Brock
On Tue, Oct 9, 2012 at 2:46 AM, Jagadish Bihani
<[email protected]> wrote:
Hi
My flume setup is:
Source Agent : cat source - File Channel - Avro Sink
Dest Agent : avro source - File Channel - HDFS Sink.
There is only 1 source agent and 1 destination agent.
I measure throughput as amount of data written to HDFS per second.
( I have rolling interval 30 sec; so If 60 MB file is generated in 30 sec
the
throughput is : -- 2 MB/sec ).
I have run source agent on various machines with different hardware
configurations :
(In all cases I run flume agent with JAVA OPTIONS as
"-DJAVA_OPTS="-Xms500m -Xmx1g -Dcom.sun.management.jmxremote
-XX:MaxDirectMemorySize=2g")
JDK is 32 bit.
Experiment 1:
=====
RAM : 16 GB
Processor: Intel Xeon E5620 @ 2.40 GHz (16 cores).
64 bit Processor with 64 bit Kernel.
Throughput: 2 MB/sec
Experiment 2:
======
RAM : 4 GB
Processor: Intel Xeon E5504 @ 2.00GHz (4 cores). 32 bit Processor
64 bit Processor with 32 bit Kernel.
Throughput : 30 KB/sec
Experiment 3:
======
RAM : 8 GB
Processor:Intel Xeon E5520 @ 2.27 GHz (16 cores).32 bit Processor
64 bit Processor with 32 bit Kernel.
Throughput : 80 KB/sec
-- So as can be seen there is huge difference in the throughput with same
configuration but
different hardware.
-- In the first case where throughput is more RES is around 160 MB in other
cases it is in
the range of 40 MB - 50 MB.
Can anybody please give insights that why there is this huge difference in
the throughput?
What is the correlation between RAM and filechannel/HDFS sink performance
and also
with 32-bit/64 bit kernel?
Regards,
Jagadish
