--sever-bind-address is used by to configure the NIC that the server uses to accept client connections. --bind-address is between peers. Only really useful in a multi-NIC system to channel traffic from clients and peer separately.
On Wed, Nov 7, 2018 at 12:39 PM, Mike Stolz <[email protected]> wrote: > I'm a little confused about the difference in gfsh between > server-bind-address and bind-address. Can anybody help me out on this? > > I started two locators one at 192.168.1.8 and another at 192.168.1.9 using > --bind-address in both cases. > > Then I started a server like this: > gfsh>start server --name=server1 > --locators=192.168.1.8[10334],192.168.1.9[10334] > --bind-address=192.168.1.8 > > which results in this: > > gfsh>list members > > Name | Id > > -------- | ------------------------------------------------------------ > > locator | 192.168.1.8(locator:9796:locator)<ec><v0>:1024 [Coordinator] > > locator1 | 192.168.1.9(locator1:4784:locator)<ec><v5>:1024 > server1 | 192.168.1.8(server1:10180)<v7>:1025 > > Then I started another server like this: > > gfsh>start server --name=server3 > --locators=192.168.1.8[10334],192.168.1.9[10334] > --server-bind-address=192.168.1.8 --server-port=40405 > > > which resulted in this: > > Name | Id > > -------- | ------------------------------------------------------------ > > server3 | 192.168.1.4(server3:10312)<v10>:1024 > > locator | 192.168.1.8(locator:9796:locator)<ec><v0>:1024 [Coordinator] > > locator1 | 192.168.1.9(locator1:4784:locator)<ec><v5>:1024 > > server1 | 192.168.1.8(server1:10180)<v7>:1025 > > > This shows that the server3 used the default address of the machine > 192.168.1.4 as the bind-address, but what did the server-bind-address > setting actually do? > -- -John john.blum10101 (skype)
