Ahh, just remembered one other issue I encountered, extra whitespace
after the IP addresses in config.xml seemed to mess things up. You
should also make sure that is ok in your copy..
-Dave-
Dave Colasurdo wrote:
> Also, if you are using your own application .. Do you have the webapp
> marked as distributable in web.xml?
>
> -Dave-
>
> Dave Colasurdo wrote:
>> Krish,
>>
>> I downloaded fresh copies of G1.1 and tried clustering again. I did
>> not see the behavior you are describing. Failover of session data
>> worked as expected. I suspect the "No engine jvmRoute attribute
>> configured" error in your run is significant. Perhaps this is somehow
>> misconfigured... Did you stop the server before updating config.xml?
>> Are the IP addresses correct in the each deployment plan and agree
>> with the settings in the webserver configuration?
>>
>> Are you hitting the webserver port 80 and not 8080 ..
>> http://YourHost/servlets-examples-cluster
>>
>> Please attach your config.xml files and deployment plans and webserver
>> config.
>>
>> BTW, Here are the logs from my run:
>>
>> Replaced node1 IP address with xx.xx.xx.xx in logs below
>> Replaced node2 IP address with yy.yy.yy.yy in logs below
>>
>>
>> *1)* Starting the first node (node 98 - aka server1)
>>
>> [snip]
>> [*********************> ] 93% 13s Starting
>> geronimo/servlets-examp...14:18:34,5
>> 46 INFO [SimpleTcpCluster] Cluster is about to start
>> 14:18:34,562 INFO [SimpleTcpCluster] Add Default ClusterListener at
>> cluster /servlets-examples-cluster
>> 14:18:34,578 INFO [ReplicationTransmitter] Start ClusterSender at
>> cluster geronimo:type=Cluster with name geronimo:type=ClusterSender
>> 14:18:34,593 INFO [McastService] Setting multihome multicast
>> interface to:/xx.xx.xx.xx
>> 14:18:34,593 INFO [McastService] Sleeping for 2000 secs to establish
>> cluster membership
>> [*********************> ] 93% 15s Starting
>> geronimo/servlets-examp...14:18:36,609 INFO [McastService] membership
>> mbean registered (geronimo:type=ClusterMembership)
>> 14:18:36,609 INFO [JvmRouteBinderValve] JvmRouteBinderValve started
>> [*********************> ] 93% 16s Starting
>> geronimo/servlets-examp...14:18:36,984 INFO [DeltaManager] Register
>> manager /servlets-examples-cluster to cluster element unknown with
>> name /servlets-examples-cluster
>> 14:18:36,984 INFO [DeltaManager] Starting clustering manager at
>> /servlets-examples-cluster
>> 14:18:36,984 INFO [DeltaManager] Manager
>> [/servlets-examples-cluster]: skipping state transfer. No members
>> active in cluster group.
>> [***********************] 100% 16s Startup complete
>>
>> [snip]
>>
>> *2)* Starting the second node (node 99 - aka server 2)
>>
>> [snip]
>> Starting Geronimo Application Server v1.1
>> [*********************> ] 93% 22s Starting
>> geronimo/servlets-examp...14:19:27,220 INFO [SimpleTcpCluster]
>> Cluster is about to start
>> 14:19:27,236 INFO [SimpleTcpCluster] Add Default ClusterListener at
>> cluster /servlets-examples-cluster
>> 14:19:27,267 INFO [ReplicationTransmitter] Start ClusterSender at
>> cluster geronimo:type=Cluster with name geronimo:type=ClusterSender
>> 14:19:27,283 INFO [McastService] Setting multihome multicast
>> interface to:/yy.yy.yy.yy
>> 14:19:27,298 INFO [McastService] Sleeping for 2000 secs to establish
>> cluster membership
>> [*********************> ] 93% 23s Starting
>> geronimo/servlets-examp...14:19:27,454 INFO [SimpleTcpCluster]
>> Replication member
>>
added:org.apache.catalina.cluster.mcast.McastMember[tcp://xx.xx.xx.xx:4001,catalina,xx.xx.xx.xx,4001,
>> alive=50500]
>> [*********************> ] 93% 24s Starting
>> geronimo/servlets-examp...14:19:29,2
>> 98 INFO [McastService] membership mbean registered
>> (geronimo:type=ClusterMembership)
>> 14:19:29,314 INFO [JvmRouteBinderValve] JvmRouteBinderValve started
>> 14:19:29,423 INFO [DeltaManager] Register manager
>> /servlets-examples-cluster to cluster element unknown with name
>> /servlets-examples-cluster
>> 14:19:29,423 INFO [DeltaManager] Starting clustering manager at
>> /servlets-examples-cluster
>> [*********************> ] 93% 25s Starting
>> geronimo/servlets-examp...14:19:29,454 WARN [DeltaManager] Manager
>> [/servlets-examples-cluster], requesting session state from
>>
org.apache.catalina.cluster.mcast.McastMember[tcp://xx.xx.xx.xx:4001,catalina,xx.xx.xx.xx,4001,
>> alive=52000]. This operation will timeout if no session state has been
>> received within 60 seconds.
>> [*********************> ] 93% 25s Starting
>> geronimo/servlets-examp...14:19:30,001 INFO [DeltaManager] Manager
>> [/servlets-examples-cluster]; session state send
>> at 7/12/06 2:19 PM received in 578 ms.
>> [***********************] 100% 25s Startup complete
>> [snip]
>>
>>
>> *3)* Added to Node1 console log when node2 is started
>>
>> 14:19:28,953 INFO [SimpleTcpCluster] Replication member
>>
added:org.apache.catalina.cluster.mcast.McastMember[tcp://yy.yy.yy.yy:4001,catalina,yy.yy.yy.yy,4001,
>> alive=0]
>>
>> *4)* Nothing is reflected in the console log when when adding values
>> to the session via the servlet.
>>
>> *5)* This gets added to node2 console when node1 is stopped..
>>
>> 14:24:40,720 INFO [SimpleTcpCluster] Received member
>>
disappeared:org.apache.caalina.cluster.mcast.McastMember[tcp://xx.xx.xx.xx:4001,catalina,xx.xx.xx.xx,4
>>
>> 01, alive=360688]
>>
>> *6)* Failover of session data works as expected..
>>
>>
>> -Dave-
>>
>> Krishnakumar B wrote:
>>> hi Dave,
>>>
>>> Thanks for ur note.
>>>
>>> I have done these checks. I get these messages in second cluster
>>> member where failover occurs.
>>>
>>> 14:53:21,003 INFO [DeltaManager] Manager
>>> [/servlets-examples-cluster]: skipping state transfer. No members
>>> active in cluster group.
>>> 15:10:34,700 WARN [JvmRouteBinderValve] No engine jvmRoute attribute
>>> configured
>>> 15:10:34,720 WARN [JvmRouteBinderValve] No engine jvmRoute attribute
>>> configured
>>>
>>> Does this mean something is wrong? I get one session value failover to
>>> second server. All cluster members are active.
>>>
>>> Regards
>>> Krish
>>>
>>> I have configured jvmRoute
>>> On 7/11/06, Dave Colasurdo <[EMAIL PROTECTED]> wrote:
>>>> Krish,
>>>>
>>>> A few things to check..
>>>>
>>>> 1) jvmRoute is unique for each node
>>>> 2) The value used in jvmRoute agrees with the value set in the mod-jk
>>>> configuration (e.g. jvmRoute=node1, jvmRoute=node2, and
>>>> worker.loadbalancer.balance_workers=node1,node2,
>>>> worker.node1.port=8009,
>>>> etc.)
>>>> 3) Deployment plan for each node has the correct IP address for each
>>>> node (in 2 spots in the xml)
>>>> 4) You are using the most recent deployment *5.5.15* deployment plan
>>>> that includes JVMRouteBinderValve... Latest plan and instructions
>>>> available at: http://cwiki.apache.org/GMOxDOC11/clustering.html
>>>> 5) Verify that both machines are truly on the same subnet.. Both
>>>> machines should use the same subnet mask. The network portion of the
>>>> addresses should be identical when the subnet mask is bitwise ANDed
>>>> with
>>>> each of the individual IP addresses.
>>>> 6) You are using the same browser instance for the whole test. Clear
>>>> the cookie cache in the browser before the test.
>>>>
>>>> -Dave-
>>>>
>>>>
>>>> Krishnakumar B wrote:
>>>> > hi,
>>>> >
>>>> > Have set the required properties in app, jvmRoute etc..
>>>> >
>>>> > The log shows this
>>>> >
>>>> > 16:46:03,810 INFO [JvmRouteBinderValve] JvmRouteBinderValve started
>>>> > 16:46:04,175 INFO [DeltaManager] Register manager
>>>> > /servlet-examples-cluster to cluster element unknown with name
>>>> > /servlet-examples-cluster
>>>> > 16:46:04,176 INFO [DeltaManager] Starting clustering manager at
>>>> > /servlet-examples-cluster
>>>> > 16:46:04,176 INFO [DeltaManager] Manager
>>>> [/servlet-examples-cluster]:
>>>> > skipping state transfer. No members active in cluster group.
>>>> >
>>>> > Does this message mean something is not correct.
>>>> > 16:46:04,176 INFO [DeltaManager] Manager
>>>> [/servlet-examples-cluster]:
>>>> > skipping state transfer. No members active in cluster group.
>>>> >
>>>> > I still get only 1 value replicated.
>>>> >
>>>> > Regards
>>>> > Krish
>>>> >
>>>> >
>>>> > On 7/10/06, Santosh Koti <[EMAIL PROTECTED]> wrote:
>>>> >>
>>>> >>
>>>> >> Hi Krishna,
>>>> >>
>>>> >> Well , can u do this way:
>>>> >>
>>>> >> 1) Stop both ur servers
>>>> >> 2) Start server server1
>>>> >> 3) Aftter server server1 is up, start ur server 2
>>>> >> 4) in ur server2 startup console, u should something like
>>>> >> deltamanager[/contextroot]...
>>>> >>
>>>> >> 5)Chk ur app...?
>>>> >> 6) Have u set jvmroute in config.xml of server2..?
>>>> >>
>>>> >> PS: U shd not get smething like jvmRoute2 bind /whatever else...?!!
>>>> >>
>>>> >>
>>>> >>
>>>> >> Thanks,
>>>> >> Santosh.
>>>> >> "Don't talk about yourself; it will be done when you leave. "
>>>> >>
>>>> >>
>>>> >> -----Original Message-----
>>>> >> From: Krishnakumar B [mailto:[EMAIL PROTECTED]
>>>> >> Sent: Monday, July 10, 2006 3:55 PM
>>>> >> To: [email protected]
>>>> >> Subject: Geronimo clustering
>>>> >>
>>>> >> Hi,
>>>> >>
>>>> >> I am trying out geronimo clustering example. I seem to have a
>>>> problem
>>>> >> with Session Failover.
>>>> >>
>>>> >> I am using Apache HTTP server 2.0.58 and mod_jk 1.2.15 and
>>>> geronimo 1.1
>>>> >>
>>>> >> I create two session variables in server 1 - server1-1 = 1 &
>>>> server1-2 =
>>>> >> 2
>>>> >> I stop server1. Only server1-2 = 2 replicated in server 2.
>>>> >> Now i add a new variable in server2 server2-1 = 1
>>>> >> Now i start server1
>>>> >> Now i stop server2
>>>> >> I should have server1-1=1, server1-2=2 and server2-1=1 in server1
>>>> >> Instead i have only server2-1=1 in server1
>>>> >>
>>>> >> I am not sure if i am doing something wrong. I have set jvmRoute in
>>>> >> config.xml, given correct IP address in cluster application plan and
>>>> >> setup workers.properties.
>>>> >>
>>>> >> I get these messages in server2
>>>> >> 15:38:37,452 WARN [JvmRouteBinderValve] No engine jvmRoute
>>>> attribute
>>>> >> configured!
>>>> >> and
>>>> >> 15:30:57,791 INFO [DeltaManager] Manager
>>>> >> [/servlets-examples-cluster]: skipping state transfer. No members
>>>> >> active in cluster group.
>>>> >> though both members of cluster are up and i am able to ping both
>>>> >> machines. there are in same subnet.
>>>> >>
>>>> >> Thanks for any pointers...
>>>> >>
>>>> >> Regards
>>>> >> Krish
>>>> >>
>>>> >> **************** CAUTION - Disclaimer *****************
>>>> >> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION
>>>> intended
>>>> >> solely for the use of the addressee(s). If you are not the intended
>>>> >> recipient, please notify the sender by e-mail and delete the
>>>> original
>>>> >> message. Further, you are not to copy, disclose, or distribute this
>>>> >> e-mail or its contents to any other person and any such actions are
>>>> >> unlawful. This e-mail may contain viruses. Infosys has taken every
>>>> >> reasonable precaution to minimize this risk, but is not liable
>>>> for any
>>>> >> damage you may sustain as a result of any virus in this e-mail. You
>>>> >> should carry out your own virus checks before opening the e-mail or
>>>> >> attachment. Infosys reserves the right to monitor and review the
>>>> >> content of all messages sent to or from this e-mail address.
>>>> Messages
>>>> >> sent to or from this e-mail address may be stored on the Infosys
>>>> >> e-mail system.
>>>> >> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>>>> >>
>>>> >
>>>> >
>>>>
>>>
>>>
>>
>>
>
>
