Hi CG, I glad that you're finally going, but I'm sorry it took me so long to finally conclude that it could be a WTP installation problem -- it's not always obvious. As a result though, I think that I shall add a troubleshooting section to our documentation for the Eclipse Plugin, include your failure(s), and the solution. We've had other failures due to improper WTP installations so at least we can start trying to consolidate the symptoms for reference and perusal. Thanks much.

CG wrote:
Hi all, I have done a clean install of WTP-all-in-one package , and
the GEP 2.1 snapshot , and everything work fine now.

Maybe I use the Eclipse update manager to download  the Geronimo 2.0
earlier and some setting is not cleaned properly.


Thanks all, I will try the 5 mins tutorial now.


On Tue, Mar 4, 2008 at 10:30 PM, Tim McConnell <[EMAIL PROTECTED]> wrote:
Hi again CG, would you be able to try the same thing that seleshmaster did ??
 i.e., Namely start with a fresh installation of eclipse and WTP ? If so, you 
can
 use the ant script on the website listed earlier to download everything you 
need
 automatically. Plus it only takes a few minutes. Otherwise, please attach the
 configuration details for you Eclipse installation. You can get this from
 Eclipse via Help --> About Eclipse SKD --> Configuration Details. From this 
data
 we can see what features and plugins you actually have installed and we can 
then
 try to figure out what exactly you're missing. Thanks much....



 CG wrote:
 > Tested with the GEP 2.1 unstable.
 > No luck , same problem.
 >
 > Trying change the ping delay to a big number , the server keep showing
 > starting status
 >
 >
 > On Tue, Mar 4, 2008 at 7:23 PM, CG <[EMAIL PROTECTED]> wrote:
 >> Hi Tim,
 >>   In fact,  I am using GEP 2.0. I thought it should be compatible to
 >>  certain extend , at least.
 >>  I'll download the unstable version to have a try again. Thanks
 >>
 >>  CG
 >>
 >>
 >>
 >>  On Tue, Mar 4, 2008 at 7:13 PM, Tim McConnell <[EMAIL PROTECTED]> wrote:
 >>  > Hi seleshmaster and CG, are you both sure that you have all the WTP 
prereqs
 >>  >  required for the Geronimo Eclipse plugin as listed here ??
 >>  >
 >>  >  -----> http://geronimo.apache.org/development-tools.html
 >>  >
 >>  >  Also, if you are using the Geronimo Eclipse Plugin version 2.1.0, where 
are you
 >>  >  getting it ?? Or are you building it yourself ?? The latest GEP 2.1.0 
can be
 >>  >  downloaded from our unstable site at:
 >>  >
 >>  >  ----->
 >>  >  
http://people.apache.org/dist/geronimo/eclipse/unstable/geronimo-eclipse-plugin-2.1.0-SNAPSHOT-deployable.zip
 >>  >
 >>  >  Finally, if you do in fact have all the prereqs installed, could you 
please
 >>  >  attach the log from your Eclipse workspace after the failure occurs ?? 
It will
 >>  >  be the .log file in your .metadata subdirectory. Thanks much....
 >>  >
 >>  >
 >>  >
 >>  >
 >>  >  seleshmaster wrote:
 >>  >  > Hello;
 >>  >  >
 >>  >  > I am also a newbie to JEE, I am having a similar problem.  Though, i 
can
 >>  >  > start the server on command line but I am unable to start the server 
in
 >>  >  > eclipse. I have setup Geronimo WTP client.
 >>  >  > The version I am running is v2.1 (Geronimo).  I was just following the
 >>  >  > "5-minute Tutorial on Enterprise Application ..."
 >>  >  >
 >>  >  > it seems it starts ok, then it just dies
 >>  >  >
 >>  >  > The error i am getting is " Server Apache Geronimo v2.0  failed to 
start"
 >>  >  >
 >>  >  > please help
 >>  >  >
 >>  >  > thx
 >>  >  >
 >>  >  >
 >>  >  >
 >>  >  > CG-6 wrote:
 >>  >  >> Hi, I am newbie in Geronimo, or more exactly , newbie in J2EE.
 >>  >  >> I have setup the Geronimo WTP client for eclipse , and when I try to
 >>  >  >> start the server it could not start.
 >>  >  >>
 >>  >  >> Environment
 >>  >  >> ==========
 >>  >  >> OS is Ubuntu 7.10
 >>  >  >> Geronimo version is geronimo-tomcat6-jee5-2.0.1
 >>  >  >> Ecplise SDK version is 3.3.1
 >>  >  >> JDK version is java_ee_sdk-5_04-linux
 >>  >  >>
 >>  >  >>
 >>  >  >> I have tried to google for solution but could not find relevant 
answer.
 >>  >  >>
 >>  >  >> I also tried to run geronimo from cli , using the startup.sh , but
 >>  >  >> seems like encounter the same problem.
 >>  >  >>
 >>  >  >> Hope that somebody can give some guidance to solve this problem. 
Thanks.
 >>  >  >>
 >>  >  >>
 >>  >  >>
 >>  >  >> Error messages are as below
 >>  >  >> ==============================
 >>  >  >>
 >>  >  >> 22:18:15,725 ERROR [GBeanInstanceState] Error while starting; GBean 
is
 >>  >  >> now in the FAILED state:
 >>  >  >> 
abstractName="org.apache.geronimo.configs/j2ee-system/2.0.1/car?configurationName=org.apache.geronimo.configs/j2ee-system/2.0.1/car"
 >>  >  >> org.apache.geronimo.kernel.repository.MissingDependencyException:
 >>  >  >> Unable to resolve dependency
 >>  >  >> org.apache.geronimo.modules/geronimo-common/2.0.1/jar
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.ConfigurationResolver.resolve(ConfigurationResolver.java:114)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.Configuration.buildClassPath(Configuration.java:404)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.Configuration.createConfigurationClasssLoader(Configuration.java:321)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.Configuration.<init>(Configuration.java:266)
 >>  >  >>      at 
sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 >>  >  >>      at
 >>  >  >> 
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 >>  >  >>      at
 >>  >  >> 
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 >>  >  >>      at 
java.lang.reflect.Constructor.newInstance(Constructor.java:513)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.gbean.runtime.GBeanInstance.createInstance(GBeanInstance.java:946)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.gbean.runtime.GBeanInstanceState.attemptFullStart(GBeanInstanceState.java:268)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.gbean.runtime.GBeanInstanceState.start(GBeanInstanceState.java:102)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.gbean.runtime.GBeanInstance.start(GBeanInstance.java:539)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.basic.BasicKernel.startGBean(BasicKernel.java:361)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.ConfigurationUtil.loadBootstrapConfiguration(ConfigurationUtil.java:195)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.ConfigurationUtil.loadBootstrapConfiguration(ConfigurationUtil.java:159)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.util.MainConfigurationBootstrapper.loadBootConfiguration(MainConfigurationBootstrapper.java:84)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.util.MainConfigurationBootstrapper.getMain(MainConfigurationBootstrapper.java:57)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.util.MainConfigurationBootstrapper.main(MainConfigurationBootstrapper.java:38)
 >>  >  >>      at 
org.apache.geronimo.cli.AbstractCLI.executeMain(AbstractCLI.java:67)
 >>  >  >>      at 
org.apache.geronimo.cli.daemon.DaemonCLI.main(DaemonCLI.java:30)
 >>  >  >> java.lang.IllegalStateException: GBean is not running:
 >>  >  >> 
org.apache.geronimo.configs/j2ee-system/2.0.1/car?configurationName=org.apache.geronimo.configs/j2ee-system/2.0.1/car
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.basic.BasicKernel.getGBean(BasicKernel.java:304)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.ConfigurationUtil.loadBootstrapConfiguration(ConfigurationUtil.java:197)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.config.ConfigurationUtil.loadBootstrapConfiguration(ConfigurationUtil.java:159)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.util.MainConfigurationBootstrapper.loadBootConfiguration(MainConfigurationBootstrapper.java:84)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.util.MainConfigurationBootstrapper.getMain(MainConfigurationBootstrapper.java:57)
 >>  >  >>      at
 >>  >  >> 
org.apache.geronimo.kernel.util.MainConfigurationBootstrapper.main(MainConfigurationBootstrapper.java:38)
 >>  >  >>      at 
org.apache.geronimo.cli.AbstractCLI.executeMain(AbstractCLI.java:67)
 >>  >  >>      at 
org.apache.geronimo.cli.daemon.DaemonCLI.main(DaemonCLI.java:30)
 >>  >  >>
 >>  >  >>
 >>  >  >
 >>  >
 >>  >  --
 >>  >  Thanks,
 >>  >  Tim McConnell
 >>  >
 >>
 >

 --
 Thanks,
 Tim McConnell



--
Thanks,
Tim McConnell

Reply via email to