This same issue has been encountered before [1] for an earlier version, but
there was no problem with the Guacamole images in that case, and rechecking
now things are still correct. The "latest" tag does point to the same image
as "0.9.13-incubating", which does contain 0.9.13-incubating:
[mjumper@dev-mjumper ~]$ sudo docker images guacamole/guacamole
REPOSITORY TAG IMAGE ID
CREATED SIZE
docker.io/guacamole/guacamole 0.9.13-incubating b602d8daff1b 11
weeks ago 659.7 MB
docker.io/guacamole/guacamole latest b602d8daff1b 11
weeks ago 659.7 MB
docker.io/guacamole/guacamole 0.9.12-incubating 9af030afb8c8 6
months ago 651.2 MB
docker.io/guacamole/guacamole 0.9.11-incubating b08c4f8e69f5 8
months ago 650.4 MB
[mjumper@dev-mjumper ~]$ sudo docker images guacamole/guacd
REPOSITORY TAG IMAGE ID CREATED
SIZE
docker.io/guacamole/guacd 0.9.13-incubating ac5de9daf9f3 11
weeks ago 499.2 MB
docker.io/guacamole/guacd latest ac5de9daf9f3 11
weeks ago 499.2 MB
docker.io/guacamole/guacd 0.9.12-incubating 8e1536c54985 6
months ago 404.9 MB
docker.io/guacamole/guacd 0.9.11-incubating 940310c23921 8
months ago 404.5 MB
[mjumper@dev-mjumper ~]$
The output from your run of "docker images" matches, so it looks like that
much is correct on your end, but if you are still seeing 0.9.12 ... you
must somehow still be pulling an old copy. The string "0.9.12-incubating"
is simply not present in these images. They are 0.9.13.
[mjumper@dev-mjumper ~]$ sudo docker run -it guacamole/guacd
[sudo] password for mjumper:
WARNING: IPv4 forwarding is disabled. Networking will not work.
guacd[1]: INFO: Guacamole proxy daemon (guacd) version 0.9.13-incubating
started
guacd[1]: INFO: Listening on host 0.0.0.0, port 4822
(See attached screenshot for guacamole/guacamole version)
If, after retrying, you still see the wrong version, I suggest using
"docker inspect" to verify that the image being used matches the image ID
of 0.9.13-incubating. If it does match, check that your browser hasn't
simply cached the old version.
- Mike
[1]
https://lists.apache.org/thread.html/962d0277242c751786615adbc232f6c669fe842a3465a6331ff4e08c@%3Cuser.guacamole.apache.org%3E
On Wed, Sep 27, 2017 at 10:31 AM, Jacob Staub <[email protected]> wrote:
> See attached for the requested output.
>
> Regards,
> Jake
>
>
> On 9/27/2017 12:27 PM, Mike Jumper wrote:
>
> On Wed, Sep 27, 2017 at 8:34 AM, Jacob Staub <[email protected]> wrote:
>
>> Images are were pulled via the Docker Pull Command listed on each
>> corresponding page. Example for guacamole:
>>
>> docker pull guacamole/guacamole
>>
>> Using the above command pulls Tag = latest. I would expect "latest" to
>> include 0.9.13-incubating but the suggestion is that "latest" does not
>> include 0.9.13-incubating.
>>
>>
> Please post the output of:
>
> docker images guacamole/guacamole
>
> docker images guacamole/guacd
>
> - Mike
>
>
>
